To display a picture from an external source in the POP window:
1.Connect the external source equipment. (refer to Connect Accessory Devices page).
2.Select the TV program you want to watch in the main window.
3.Press PIP to display the POP window.
4.Repeatedly press SOURCE to select the input source for the POP window.
To change the PIP picture size:
Press PIP SIZE button to select the PIP picture size, such as: Small, Middle, Large.
To change the PIP position:
Press PIP POS button to change the PIP window position under PIP mode, it display as following;
Right Down → Left Down → Left Up → Right Up → Right Down
Left Up |
| Right Up |
|
|
|
Left Down |
| Right Down |
|
|
|
PIP SIZE PIP POS
ENTER
Switching the pictures:
When in Basic PIP mode, press “ENTER” to swap main or sub pictures; When in LR POP mode, press “ENTER” swap the L/R pictures.
To change Main or Sub sound:
When the red frame is displaying in main window, the sound goes out of main window source. If it display in sub window, the sound goes out of sub window source.
6.5 OSD Option Adjustment
Learning about the menu system
After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu using the buttons on your TV or remote control.
The OSD menu displayed in the following sequence (circular display):
Video 
Audio 
Misc 
TV 
Geometric
(Continued on next page)
21
