Akai LCT3226 manual Basic Operation, Power ON/OFF The Display is in Standby mode, Other Function

POWER ON, OFF SELECTION OF INPUT MODE OTHER FUNCTION

6. Basic Operation

6.1Power ON/OFF: The Display is in Standby mode

-Press the POWER on the remote control or Standby on the control panel to turn on the unit. The power indicator changes from red to green.

-Press the POWER on the remote control or Standby on the control panel again to return the display to standby mode.

The power indicator changes from green to red.

Note: ⑴ Press CH +/- on the remote control can turn on TV set from last preview mode.

⑵For protecting your LCD TV product, the interval time between turn on the LCD TV product and shut down it should be kept at least one minute.

6.2Selection of Input Mode

-Press SOURCE / on the remote control or on the LCD TV control panel to select the signal source you desired.

When no input from the selected signal source, “Main no signal” will appear, press SOURCE / on the remote control or on the control panel again to search the next source.

POWER

SOURCE

CH+/CH- ◄,► ENTER

ADD/EARSE FAVORITE

Note: The LCD-TV will automatically turn itself off after approximately 15 minutes if no signal input. When no signal is inputed for

about 14 minutes. A “No signal and going to power down” wording will appear.You can press “◄” or “►” button to selected, press “ENTER” to confirm. If select “Cancel” or no operation, the LCD-TV will automatically turn off after 1 minutes, if select “OK”, it will turn off immediately.

6.3 Other Function

FAVORITE:

-Press FAVORITE button repeatedly, you will cycle through Favorite Channel. ADD/ERASE:

-Press this button to add/erase current channel to/from the list of favorite directly.

1 Add current channel into the list of favorite if a heart shape mark displaying on the left top of screen.

2 Erase current channel from the list of favorite if a broken heart shape mark displaying.

(Continued on next page)

18