1Press MENU, and then press or until the “Geometric” menu appears.
2 Press or to highlight the item.
3 Press or to select one of “Bright”, “Middle” or “Dark” for the balance of back light.
4 Press “ENTER” to confirm the adjustment. Press to return.
■Using “Auto Setting”
1Press MENU, and then press or until the “Geometric” menu appears.
2Press or to highlight the item.
3 Press “ENTER” to confirm.
4 Press to return.
Note:
This item will auto-adjust the picture display.
■Using “Phase”
1Press MENU, and then press or until the “Geometric” menu appears.
2 Press or to highlight the item.
3 Press “ENTER” to confirm and display a status bar as below.
4Press to decrease and press to increase it.
5 Press “ENTER” to confirm and return.
Note: This is a feature used for VGA input source.
43