Akai LCT3226 manual Setting of “V-Chip”, Note The initial password for the system is “0000”

OSD FUNCTIONS----MISCELLANEOUS MENU

■Setting of “V-Chip”

Some programs and movies include signals that classify the content of the program (dialog, language, sex, violence). The “V-Chip” control feature in this detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup.

Adjustment only for TV, AV, S-VIDEO input signal.

1Press MENU, and then press ◄ or ► until the “Misc” menu appears.

2 Press ▲ or ▼ to highlight the item.

3 Press “ENTER” to confirm.

The “V-Chip” menu includes the “V-Chip Control”, “Block MPAA Rating”, and “Block TV Rating” functions. You can use these functions after entering the correct PIN code.

Entering the PIN code

▪Blocking Reset status:

Set your 4-digit code by pressing the Number buttons (0~9), and then press ENTER.

▪When the PIN code is already stored:

Press the Number buttons (0~9) to enter the 4-digit PIN code used for blocking channels, and then press ENTER.

Note: The initial password for the system is “0000”.

If you had forgotten the password, please contact with service centre.

If the input is invalid, a message will pop up as below;

(Continued on next page)

32