Linksys WRT320N manual Wireless Wireless Security, Wi-Fi Protected Setup

Page 15

Chapter 3

Advanced Configuration

Router's SSID, keep the default setting, Enabled. If you do not want to broadcast the Router's SSID, then select Disabled.

Click Save Settings to apply your changes or click Cancel Changes to cancel your changes.

Wi-Fi Protected Setup

There are three methods available. Use the method that applies to the client device you are configuring.

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

NOTE: Wi-Fi Protected Setup configures one client device at a time. Repeat the instructions for each client device that supports Wi-Fi Protected Setup.

Method #1

Use this method if your client device has a Wi-Fi Protected Setup button.

1.Click or press the Wi-Fi Protected Setup button on the client device.

2.Click the WiFi Protected Setup button on this screen.

3.After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions.

Method #2

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

1.Enter the PIN number in the field on this screen.

2.Click Register.

3.After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions.

Method #3

Use this method if your client device asks for the Router's PIN number.

1.Enter the PIN number listed on this screen. (It is also listed on the label on the bottom of the Router).

2.After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions.

The Wi-Fi Protected Setup Status, Network Name (SSID), Security, Encryption and Passphrase are displayed at the bottom of the screen.

NOTE: If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings and then manually configure those client devices.

Wireless > Wireless Security

The Wireless Security screen configures the security of your wireless network. There are six wireless security mode options supported by the Router: WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, RADIUS and WEP. (WPA stands for Wi-Fi Protected Access, which is a security standard stronger than WEP encryption. WEP stands for Wired Equivalent Privacy, while RADIUS stands for Remote Authentication Dial-In User Service). These six are briefly discussed here. For detailed instructions on configuring wireless security for the Router, refer to "Chapter 2: Wireless Security."

Wireless Security

Security Mode

Select the security method for your wireless network. If you do not want to use wireless security, keep the default, Disabled.

WPA Personal

NOTE: If you are using WPA, always remember that each device in your wireless network MUST use the same WPA method and shared key or else the network will not function properly.

Dual-Band Wireless-N Gigabit Router

14

Image 15
Contents Dual-Band Wireless-N Gigabit Router Icon Descriptions Online ResourcesCopyright and Trademarks Table of Contents Appendix E Software Licence Agreement Appendix D Regulatory InformationBack Panel Placement PositionsHorizontal Placement Front PanelSuggested Mounting Hardware Wall-Mounting PlacementAdditional Security Tips General Network Security GuidelinesAutomatic Configuration Dhcp How to access the Web-Based UtilitySetup Basic Setup Internet SetupPPPoE Static IPTelstra Cable Optional SettingsDhcp Reservation Network SetupDhcp Server Setting Router IPDynDNS.org Setup DdnsTime Setting Ddns ServiceAdvanced Routing Setup MAC Address CloneSetup Advanced Routing MAC Address CloneWireless Basic Wireless Settings Basic Wireless SettingsRouting Table Wireless Wireless Security Wi-Fi Protected SetupWireless Security WPA2 Personal WPA EnterpriseWPA2 Enterprise Radius Wireless Wireless MAC FilterWireless Client List Wireless MAC FilterAdvanced Wireless Access RestrictionWeb Filter Security FirewallFirewall Internet FilterSummary Internet Access PolicySecurity VPN Passthrough VPN PassthroughSingle Port Forwarding Applications and Gaming Single Port ForwardingPort Range Triggering Applications and Gaming Port Range ForwardingApplications & Gaming Port Range Triggering Port Range ForwardingApplications and Gaming QoS QoS Quality of ServiceWireless Applications and Gaming DMZCategory Internet Access PriorityRemote Access Administration ManagementRouter Access Web AccessUPnP Administration LogBackup and Restore LogDiagnostics Administration DiagnosticsAdministration Factory Defaults RebootAdministration Firmware Upgrade Status RouterStatus Local Network Dhcp Server Status Wireless NetworkWireless Network Local NetworkAppendix a Troubleshooting Appendix B Specifications Limited Warranty Obtaining Warranty ServiceExclusions and Limitations General Technical SupportAvis d’Industrie Canada Safety NoticesFCC Statement Industry Canada StatementWireless Disclaimer Изисквания Приложими Denmark Wireless Equipment Wireless-N/G/A/B ProductsCE Marking National RestrictionsTechnical Documents on Product Usage RestrictionsDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Software in Linksys Products Software LicencesSchedule 1 Linksys Software Licence Agreement GNU General Public Licence SchedulePreamble Software Licence Agreement No Warranty GNU Lesser General Public Licence Software Licence Agreement Software Licence Agreement Software Licence Agreement No Warranty Original SSLeay Licence OpenSSL Licence8122210NC-AI

WRT320N specifications

The Linksys WRT320N is a wireless router that has garnered attention for its robust performance and feature-rich capabilities, making it an excellent choice for home and small office networks. Part of the renowned WRT series, the WRT320N is designed to elevate your internet experience through its advanced technologies and user-friendly features.

One of the standout features of the WRT320N is its dual-band functionality, allowing users to operate on both the 2.4 GHz and 5 GHz frequencies. This dual-band capability helps to minimize interference, providing a stable connection, especially in environments with multiple devices connected simultaneously. The router supports Wireless-N technology, which enhances the speed and range of wireless connections, making it ideal for streaming videos, online gaming, and large file transfers.

Equipped with four Gigabit Ethernet ports, the WRT320N allows for high-speed wired connections for devices that require stable connectivity, such as gaming consoles, desktop computers, and media servers. This ensures that users can experience minimal latency during online activities while benefitting from high data transfer rates.

Another significant advantage of the WRT320N is its easy-to-use setup and management interface. Users can access the web-based administration panel, which simplifies the process of configuring network settings, parental controls, and security options. The router also supports the Linksys Smart Wi-Fi application, enabling remote management of the network from mobile devices, offering added convenience for users on the go.

In terms of security, the WRT320N is equipped with advanced features to protect your network against unauthorized access. It supports Wi-Fi Protected Access (WPA/WPA2) encryption, ensuring that your data remains secure during transmission. The router also includes a built-in firewall that provides an extra layer of protection for your home network.

The Linksys WRT320N is not only about performance; it is designed with user experience in mind. Its sleek, modern design features a robust casing that not only enhances durability but also ensures optimal heat dissipation during operation. Overall, the WRT320N offers a compelling combination of speed, range, and security tailored for today's connectivity needs, making it a solid addition to any network setup.