Front Panel, Back Panel, Placement Positions

Chapter 1

Product Overview

Chapter 1:

Product Overview

Thank you for choosing the Linksys Dual-band Wireless-N Gigabit Router. The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources, such as computers. A variety of security features help to protect your data and your privacy while online. Security features include WPA2 security, a Stateful Packet Inspection (SPI) firewall and NAT technology. Configuring the Router is easy using the provided browser-based utility.

Front Panel

1, 2, 3, 4 (Green/Blue) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. The LED is solidly lit when the Router is connected to a device through that port. It flashes to indicates network activity. Green indicates Gigabit speeds, and blue indicates 10/100 speeds.

Wi-Fi Protected Setup Button If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless security for your wireless network(s).

To use Wi-Fi Protected Setup, run the Setup Wizard, or refer to the "Wireless > Basic Wireless Settings" section of "Chapter 3: Advanced Configuration".

Wi-Fi Protected Setup LED (Blue/Amber) It lights up blue when wireless security is enabled. The LED flashes blue for two minutes during Wi-Fi Protected Setup.

The LED lights up amber if there is an error during the Wi‑Fi Protected Setup process. Make sure the client device supports Wi‑Fi Protected Setup.Wait until the LED is off, and then try again.

The LED flashes amber when a Wi‑Fi Protected Setup session is active, and a second session begins. The Router supports one session at a time. Wait until the LED is off before starting the next Wi-Fi Protected Setup session.

Wireless (Blue) The Wireless LED lights up when the wireless feature is enabled. If the LED is flashing, the Router is actively sending or receiving data over the network.

Internet (Blue) The Internet LED lights up when there is a connection made through the Internet port. A flashing LED indicates network activity over the Internet port.

Power (Blue) The Power LED lights up and will stay on while the Router is powered on. When the Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When the diagnostic is complete, the LED will be solidly lit.

Back Panel

Internet This Gigabit port is where you will connect your cable or DSL Internet connection.

1, 2, 3, 4 These Gigabit ports (1, 2, 3, 4) connect the Router to computers and other Ethernet network devices on your wired network.

Reset There are two ways to reset the Router's factory defaults. Either press and hold the Reset Button for approximately five seconds, or restore the defaults from Administration > Factory Defaults in the Router's web-based utility.

Power The Power port is where you will connect the power adapter.

Placement Positions

There are two ways to physically install the Router. The first way is to place the Router horizontally on a surface. The second way is to mount the Router on a wall.

Horizontal Placement

The Router has four rubber feet on its bottom panel. Place the Router on a level surface near an electrical socket.

Dual-Band Wireless-N Gigabit Router

WRT320N specifications

The Linksys WRT320N is a wireless router that has garnered attention for its robust performance and feature-rich capabilities, making it an excellent choice for home and small office networks. Part of the renowned WRT series, the WRT320N is designed to elevate your internet experience through its advanced technologies and user-friendly features.

One of the standout features of the WRT320N is its dual-band functionality, allowing users to operate on both the 2.4 GHz and 5 GHz frequencies. This dual-band capability helps to minimize interference, providing a stable connection, especially in environments with multiple devices connected simultaneously. The router supports Wireless-N technology, which enhances the speed and range of wireless connections, making it ideal for streaming videos, online gaming, and large file transfers.

Equipped with four Gigabit Ethernet ports, the WRT320N allows for high-speed wired connections for devices that require stable connectivity, such as gaming consoles, desktop computers, and media servers. This ensures that users can experience minimal latency during online activities while benefitting from high data transfer rates.

Another significant advantage of the WRT320N is its easy-to-use setup and management interface. Users can access the web-based administration panel, which simplifies the process of configuring network settings, parental controls, and security options. The router also supports the Linksys Smart Wi-Fi application, enabling remote management of the network from mobile devices, offering added convenience for users on the go.

In terms of security, the WRT320N is equipped with advanced features to protect your network against unauthorized access. It supports Wi-Fi Protected Access (WPA/WPA2) encryption, ensuring that your data remains secure during transmission. The router also includes a built-in firewall that provides an extra layer of protection for your home network.

The Linksys WRT320N is not only about performance; it is designed with user experience in mind. Its sleek, modern design features a robust casing that not only enhances durability but also ensures optimal heat dissipation during operation. Overall, the WRT320N offers a compelling combination of speed, range, and security tailored for today's connectivity needs, making it a solid addition to any network setup.