![](/images/new-backgrounds/1149861/14986111x1.webp)
Chapter 1
Product Overview
Wall-Mounting Placement
The Router has two
Two screws are needed to mount the Router.
Suggested Mounting Hardware
††Note: Mounting hardware illustrations are not true to scale.
NOTE: Linksys is not responsible for damages incurred by insecure
Follow these instructions:
1.Determine where you want to mount the Router. Make sure that the wall you use is smooth, flat, dry and sturdy. Also make sure the location is within reach of an electrical socket.
2.Drill two holes into the wall. Make sure the holes are 152 mm (6 inches) apart.
3.Insert a screw into each hole and leave 3 mm (0.12 inches) of its head exposed.
4.Manoeuvre the Router so the
5.Place the
152 mm
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drill precise spacing.
Wall Mounting Template
5 |