Linksys WRT54GP2 manual For Windows 98 and Millennium, Need to set a static IP address on a PC

Page 62

Wireless-G Broadband Router with 2 Phone Ports

C.Click Tools. Click Internet Options. Click the Security tab. Click the Default level button. Make sure the security level is Medium or lower. Then click the OK button.

3.I need to set a static IP address on a PC.

The Router, by default, assigns an IP address range of 192.168.15.100 to 192.168.15.150 using the DHCP server on the Router. To set a static IP address, you can only use the ranges 192.168.15.2 to 192.168.15.99 and 192.168.15.151 to 192.168.15.254. Each PC or network device that uses TCP/IP must have a unique address to identify itself in a network. If the IP address is not unique to a network, Windows will generate an IP conflict error message. You can assign a static IP address to a PC by performing the following steps:

For Windows 98 and Millennium:

A.

Click Start, Setting, and Control Panel. Double-click Network.

B.

In The following network components are installed box, select the TCP/IP-> associated with your

 

Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCP/IP line with

 

no association to an Ethernet adapter. Highlight it and click the Properties button.

C.

In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a

 

unique IP address that is not used by any other computer on the network connected to the Router. You

 

can only use an IP address in the ranges 192.168.15.2 to 192.168.15.99 and 192.168.15.151 to

 

192.168.15.254. Make sure that each IP address is unique for each PC or network device.

D.

Click the Gateway tab, and in the New Gateway prompt, enter 192.168.15.1, which is the default IP

 

address of the Router. Click the Add button to accept the entry.

E.

Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the Host and Domain

 

names (e.g., John for Host and home for Domain). Enter the DNS entry provided by your ISP. If your ISP

 

has not provided the DNS IP address, contact your ISP to get that information or go to its website for the

 

information.

F.

Click the OK button in the TCP/IP properties window, and click Close or the OK button for the Network

 

window.

G.

Restart the computer when asked.

54

Appendix A: Troubleshooting

 

Common Problems and Solutions

Page 61 Page 63
Image 62
Page 61 Page 63
Contents
Wireless- G Page Word definition How to Use this GuideCopyright and Trademarks Wireless-G Broadband Router with 2 Phone Ports Table of Contents Appendix C Finding the MAC Address Vonage LinksysList of Figures Wireless Security WEPWireless Network Access 39 Status Tab Local Network Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? Wireless-G Broadband Router with 2 Phone Ports Ssid your wireless network’s name Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyNetwork Layout Getting to Know the Router Back PanelFront Panel WlanConnecting the Router OverviewConnection Instructions Connect a PCConfiguring the Router Security SetupWireless Applications & Gaming AdministrationVoice How to Access the Web-based Utility StatusInternet Connection Type Setup Tab Basic SetupInternet Setup Obtain an IP automaticallyStatic IP PPPoE Pptp Heart Beat Signal Router IP Network SetupOptional Settings Packet a unit of data sent over a networkNetwork Address Server Settings Dhcp Setup Tab Ddns Time SettingDynDNS.org TZO.comSetup Tab MAC Address Clone MAC CloneSetup Tab Advanced Routing Advanced Routing13 Routing Table Entry List Wireless Tab Basic Wireless Settings Wireless Tab Wireless Security 15 Wireless Tab Wireless Security WPA Pre-Shared Key16 Wireless Tab Wireless Security WPA Radius Wireless Tab Wireless Network Access 18 Wireless Tab Wireless Network AccessWireless Tab Advanced Wireless Settings 20 Advanced Wireless SettingsWireless-G Broadband Router with 2 Phone Ports Filter Port Range Security Tab FilterFilter IP Address Range Filter MAC AddressBlock WAN Requests Internet requestsSecurity Tab VPN Passthrough VPN PassthroughPort Range Forwarding Voice TabApplications & Gaming Tab Port Range Forwarding Port Range26 Applications & Gaming Tab Port Triggering Forwarded Range Applications & Gaming Tab UPnP ForwardingUPnP Forwarding Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Applications & Gaming Tab DMZ DMZApplications & Gaming Tab QoS Application-based QoSPort-based QoS Specific Port# fieldsVoice QoS Local Router Access Administration Tab ManagementRouter Password Remote Router AccessBackup and Restore UPnPAdministration Tab Log LogRuns a networking device Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Firmware with a newer versionLine1 Status Status Tab VoiceInformation Line2 StatusStatus Tab Router 38 Status Tab Router Status Tab Local Network Local NetworkStatus Tab Wireless Appendix a Troubleshooting Common Problems and SolutionsFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows For Windows XPWant to test my Internet connection For Windows XP Wireless-G Broadband Router with 2 Phone Ports Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my Router Application Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work Appendix a Troubleshooting Common Problems and Solutions For Microsoft Internet Explorer 5.0 or higher To start over, I need to set the Router to factory defaultMy DSL service’s PPPoE is always disconnecting For Netscape 4.7 or higherWireless-G Broadband Router with 2 Phone Ports Go through this checklist until your problem is solved Frequently Asked Questions What is Network Address Translation and what is it used for? How can I block corrupted FTP downloads? Will the Router function in a Macintosh environment? If all else fails in the installation, what can I do?What is DMZ Hosting? Which modems are compatible with the Router? Is the Router cross-platform compatible?How many ports can be simultaneously forwarded? How can I check whether I have static or Dhcp IP addresses?What Ieee 802.11b features are supported? What is the Ieee 802.11b standard?What is the Ieee 802.11g standard? What is infrastructure mode? What Ieee 802.11g features are supported?What is ad-hoc mode? What is roaming?What is ISM band? What is Spread Spectrum?What is WPA? What is DSSS? What is FHSS? And what are their differences?What is WEP? What is a MAC Address?Have excellent signal strength, but I cannot see my network How many channels/frequencies are available with the Router?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Figure C-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions For the Router’s Web-based UtilityNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix D Windows Help Appendix E Glossary Appendix E Glossary Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Voice Protocol Appendix F SpecificationsModel UPnP able/cert CertifiedDimensions 32 x 1.89 x H x D Appendix G Warranty Information Limited WarrantyAppendix G Warranty Information Appendix H Regulatory Information FCC StatementSafety Notices Need to contact Vonage? VonageLinksys Hour 1-VONAGE-HELPLinksys
Related manuals
Manual 112 pages 50.53 Kb
Top Page Image Contents