Linksys WRT54GP2A-AT manual Optional Settings, Packet a unit of data sent over a network

Page 21

Broadband Router with 2 Phone Ports

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe and Israel only.

Internet IP Address. This is the IP address that the Router has, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Default Gateway Address.

User Name and Password. Enter the User Name and Password provided by your ISP.

Connect on Demand and Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain on at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

Keep Alive and Redial Period. This option keeps your Internet access connected indefinitely, even when it sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection is down, then the Router will automatically re-establish the connection. To use this option, click the radio button next to Keep Alive. The default Redial Period is 30 seconds.

When you are finished, click the Save Settings button. Then click the Status tab, and click the Connect button to start the connection.

Optional Settings

Some of these settings may be required by your ISP. Verify with your ISP before making any changes.

Router Name. Enter a name for this Router.

Host Name and Domain Name. These fields allow you to supply a host and domain name for the Router. Some ISPs require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work.

MTU. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. The default is Auto. If you want to manually enter a value, select Manual and enter the value

Chapter 5: Configuring the Router

Figure 5-6: PPTP

packet: a unit of data sent over a network

15

The Setup Tab - Basic Setup

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 802 GHz .11g Wireless- G How to Use this Guide Copyright and TrademarksWord definition Table of Contents Appendix a Troubleshooting Signing up for AT&T CallVantagesm ServiceAppendix B Wireless Security Appendix C Windows HelpBack Panel List of Figures18 Wireless Tab Advanced Wireless Settings Welcome IntroductionWhat’s in this Guide? Wireless-G Broadband Router with 2 Phone Ports Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid your wireless network’s name Network TopologyNetwork Layout Phone2 Getting to Know the RouterWlan Connecting the Router Connecting the Router to Your Broadband ModemOverview Wired Router Connecting One Router to AnotherConnect the Other Router Configuring the Router SetupWireless Administration Access RestrictionsSecurity Applications & GamingSetup Tab Basic Setup How to Access the Web-based UtilityInternet Setup StatusPPPoE Static IPPacket a unit of data sent over a network Optional SettingsNetwork Setup Network Address Server Settings DhcpRouter IP Time Setting Setup Tab Ddns DynDNS.orgTZO.com MAC Clone Setup Tab MAC Address Clone10 Wireless Tab Basic Wireless Settings Wireless Tab Basic Wireless SettingsWPA Radius Wireless Tab Wireless SecurityRadius 15 Wireless Tab Wireless MAC Filter Wireless Tab Wireless MAC FilterWireless Tab Advanced Wireless Settings Firewall Security Tab FirewallAdditional Filters Block WAN RequestsVPN Passthrough Security Tab VPNAccess Restrictions Tab Internet Access Internet AccessTo create an Internet Access Policy 23 List of PCs Applications & Gaming Tab Port Range Forward Port Range ForwardPort Range Port Trigger Applications & Gaming Tab Port TriggerTriggered Range Forwarded RangeUPnP Forward Applications & Gaming Tab UPnP ForwardBroadband Router with 2 Phone Ports DMZ Applications & Gaming Tab DMZRouter Password Administration Tab ManagementLocal Router Access Remote Router AccessUPnP SnmpLog Administration Tab LogPing Test Administration Tab DiagnosticsTraceroute Test Ping ParametersFactory Defaults Administration Tab Factory DefaultsAdministration Tab Reboot Administration Tab Backup and RestoreBackup and Restore RebootStatus Tab Router Configuration TypeRouter Information InternetLocal Network Status Tab Local Network39 Status Tab Wireless Status Tab WirelessStatus Tab Voice Auto Config StatusUser1 Status User2 StatusInstructions Signing up for AT&T CallVantagesm ServiceCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC For Windows 98 and MillenniumFor Windows XP For WindowsFor Windows 98 and Millennium Wireless-G Broadband Router with 2 Phone Ports Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupTCP Application Start and End Protocol IP Address EnableCan’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherNeed to use port triggering Frequently Asked Questions Can I make calls if my Internet connection is down?Can I make calls while I’m browsing the Internet? Where is the Router installed on the network? Is IPSec Passthrough supported by the Router?Does the Router support IPX or AppleTalk? If all else fails in the installation, what can I do? How can I block corrupted FTP downloads?Will the Router function in a Macintosh environment? What is the Ieee 802.11b standard? What is DMZ Hosting?Is the Router cross-platform compatible? How many ports can be simultaneously forwarded?What Ieee 802.11b features are supported? What is the Ieee 802.11g standard?What Ieee 802.11g features are supported? What is ad-hoc mode?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WPA? What is WEP?What is a MAC Address? How do I reset the Router?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Broadband Router with 2 Phone Ports Appendix C Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure D-3 MAC Address/Physical Address For the Router’s Web-based UtilityAppendix E Glossary Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Wireless-G Broadband Router with 2 Phone Ports Button Reset Cabling Type Appendix F SpecificationsModel StandardsUnit Weight 19.29 oz .55 kg Power 12 V, 1 a Certifications Dimensions 32 x 2.48 x H x DRinger Equivalence Number Operating Temp 0ºC to 40ºC 32ºF to 104ºF Storage TempLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationSafety Notices Linksys Appendix I Contact InformationAfter you log in, click Help. Then click Email AN Agent Need to contact Linksys?
Top Page Image Contents