Linksys E-4200, E4200 manual To reconfigure your wireless network, Wireless Basic Wireless Settings

Page 33

Linksys E-Series

Upgrade your wireless clients

If you have network adapters that support only legacy wireless network standards such as 802.11b, you should consider upgrading them with Wireless-N (802.11n) network adapters. Wireless-B (802.11b) devices can slow your entire wireless network. For the best performance, all of your wireless devices should support Wireless-N. You can then select Wireless-N Only as your Network Mode below.

NOTE

If you select Wireless-N Only, you may need to temporarily change your network settings to Mixed to provide access to guests without Wireless-N networking.

Split your traffic

The best way to improve your multimedia wireless performance is to split your wireless traffic between your router’s two bands (ranges of radio frequencies). Your router supports the 2.4 GHz band and the 5 GHz band, and handles the two bands as two separate wireless networks to help manage the traffic.

The most common way to split wireless traffic is to use the 2.4 GHz band for basic Internet tasks such as web browsing, email, and downloads, and use the 5.0 GHz band for streaming multimedia. There are several reasons for this approach:

••Although the 2.4 GHz band may be more crowded with wireless traffic from your neighbors, it’s fine for basic Internet traffic that is not time- sensitive (such as e-mail).

••Even though you are connected to your own wireless network, you are still sharing “air time” with nearby networks.

••The 5 GHz band is much less crowded than the 2.4 GHz band, so it’s ideal for streaming multimedia.

••The 5 GHz band has more available channels, so it is more likely that you will have your own, interference-free channel for your wireless network.

By default, your dual-band router uses the same network name on both the

2.4GHz band and the 5 GHz band. If you are connecting to your router with a computer that has a dual-band wireless network adapter, you might not be able to determine which band you’re using. The easiest way to segment your traffic is to rename one of your wireless networks. With a separate, descriptive name, it will be easy to connect to the right network.

Setting Up: Advanced

To reconfigure your wireless network:

Wireless > Basic Wireless Settings

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 21).

2.Click the Wireless tab, then click the Basic Wireless Settings page.

3.Click Manual. This enables you to make changes to all of the fields below.

a.Network Mode—Your choice depends upon the clients that will connect to your network. If all of your devices are Wireless-N capable, you can select Wireless-N Only for either or both bands.

On the 5 GHz band, you can select:

••Mixed (default), which accepts connections from 802.11a or 802.11n clients

••Wireless-A Only (802.11a only)

••Wireless-N Only (802.11n only)

••Disabled, which disables the 5.0 GHz band on this router

On the 2.4 GHz band, you can select:

••Mixed

••Wireless-B/G Only

••Wireless-B only

••Wireless-G Only

••Wireless-N Only

••Disabled

23

Page 32 Page 34
Image 33
Page 32 Page 34
Contents User Guide Linksys E-Series E1200/E1500 Contents Browser-based Utility Menu Structure E2500 Contents E250062 E3200 Contents Browser-based Utility Menu Structure E4200 Contents Viii Features Package contentsProduct overview E1200/E1500Bottom view Back viewE2500 Power of dual bandEthernet ports Wi-Fi Protected Setup button Benefits of gigabit E3200Port activity indicators Built-in USB port and UPnP media server E4200Top view Product overview How to create a home network Setting Up BasicsWhere to find more help How to set up your routerClick Set up your Linksys Router. If you do not see this How to start Cisco ConnectTo start Cisco Connect for the first time To start Cisco Connect on a Windows computerHow to test your Internet connection speed How to improve your wireless connection speedHow to install Cisco Connect on another computer To install Cisco Connect onto another computerHow to connect devices to your network How to connect a computer to your networkTo create an Easy Setup Key To manually connect a computer to your network How to connect a computer manuallyHow to connect other devices How to connect a printerTo connect a wireless printer to your network To manually connect a device to your networkHow to set up parental controls How to access parental controlsTo access parental controls for the first time To change the parental controls password To access parental controls after the first timeHow to select the computers to have parental controls How to set parental controlsTo select computers that will have parental controls To set up guest access to your network How to set up guest access to your networkTo change your router’s name and password How to change your router’s name and passwordHow to open the browser-based utility Setting Up AdvancedHow to manually set up your router To manually set up your routerHow to manually set up your Internet connection How to get the most out of your dual- band routerTo manually configure your router’s Internet connection Setup Basic SetupTo reconfigure your wireless network Wireless Basic Wireless SettingsWireless-A Only 802.11a only Wireless-N Only 802.11n only To configure your router’s Dhcp server settings How to set up the Dhcp server on your routerSetup Basic Setup Dhcp Server Settings Auto 20 MHz or 40 Mhz MHz OnlyHow to set up Dhcp reservation How to find your network on the InternetTo configure Dhcp reservation Click Save SettingsSetup MAC Address Clone How to clone a MAC addressBronzeEagle953.linksysnet.com1024 To clone a MAC address from your computerHow to optimize your router for gaming and voice How to connect to your corporate office using a VPNTo change your VPN passthrough settings Security VPN PassthroughApplications & Gaming QoS To configure QOSConfigure Upstream Bandwidth How to remotely change your router settingsAdministration Management To access your router remotelyHow to configure UPnP How to enable Voice over IP on your networkHow to use a router as an access point To configure the router for VoIPTo use your old router as an access point To view your new router’s settingsTo add a router to your existing wireless network How to put your new router behind an existing routerTo add your router to an existing router or gateway To share an Internet connectionTo use their DNS To extend your network or add wireless capabilities How to expose a device to the InternetTo set up a device in the DMZ To extend your networkClick Save Settings to apply your changes Network security following a manual setup Improving SecurityHow do I know if my network is secure? How to set up wireless security using Wi‑Fi Protected Setup Wi-Fi Protected Setup activity lightConnecting a device using the Wi-Fi Protected Setup button How to connect a device manually How to connect a device using its Wi-Fi Protected Setup PINWireless Wireless MAC Filter How to control access to your wireless networkHow to improve security using the built-in firewall To change your firewall settingsSecurity-Firewall How to configure storage Using an External DriveHow to create shared folders To create a shared folderHow to manage group and user access to shared folders To disable anonymous disk access How to create a groupStorage Administration To create a groupHow to grant group access to a share How to create a new userTo grant group access to a share To create a new userHow to configure the FTP server How to configure your router’s storage for remote accessTo set up your router for remote file access, you need to To configure the FTP serverTo configure FTP and control folder access How to share folders and set access rightsTo access files remotely How to access files remotelyHow to set up your router as a media server To configure your router as a media serverStorage Media Server To connect an UPnP device to your router’s media server How to connect your UPnP device to the media serverHow to set up port forwarding for a single port How to set up port forwardingPort Forwarding and Port Triggering Applications & Gaming Single Port ForwardingHow to set up port forwarding for multiple ports How to set up port forwarding for a range of portsTo set up single port forwarding for multiple ports To set up port range forwarding How to set up port range triggering for online gamingApplications & Gaming Port Range Forwarding Applications & Gaming Port Range TriggeringHow to configure your Xbox for online gaming How to restore factory defaults How to back up and restore your router configurationTo back up your router configuration To restore your router configurationHow to upgrade the router’s firmware Administration Factory DefaultsClick Restore Factory Defaults How to check the status of your router To upgrade the router’s firmwareAdministration Firmware Upgrade To check your router status using the browser-based utility How to disable the Ethernet port status lightsTo disable the lights using the browser-based utility How to test your Internet connectionAdministration Diagnostics To diagnose your Internet connectionAdministration Log How to configure and use logsMaintaining and Monitoring Browser-based Utility Menu Structure SetupBrowser-based Utility Menu Structure Storage Access Restrictions Linksys E1200 SpecificationsLinksys E1500 SpecificationsLinksys E2500 Linksys E3200 Linksys E4200 3425-01486

E-4200, E4200V2, E4200 specifications

The Linksys E4200 series, including the E4200, E4200V2, and E-4200 models, is a renowned line of dual-band wireless routers designed to deliver high-performance connectivity for both home and small office environments. These routers are well-regarded for their distinct features, advanced technologies, and user-friendly characteristics that cater to various networking needs.

One of the main features of the Linksys E4200 series is its dual-band capability, operating on both the 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to optimize their wireless connections, enabling devices that require higher bandwidth, such as gaming consoles and streaming devices, to connect via the 5GHz band for reduced interference and improved speeds. Conversely, standard devices can conveniently operate on the 2.4GHz band.

The E4200 series also boasts Linksys' advanced N600 technology, which delivers combined wireless speeds of up to 600 Mbps. This high-speed performance is crucial for households with multiple devices streaming content, participating in video calls, or engaging in online gaming simultaneously. With four Gigabit Ethernet ports, users can connect wired devices with blazing fast speeds, enhancing the overall network performance.

In terms of range, the E4200 series incorporates multiple external antennas and the MIMO (Multiple Input Multiple Output) technology, which enhances signal strength and coverage throughout larger spaces. This ensures that users can enjoy strong connections even in remote areas of their homes or offices.

Another significant characteristic of the Linksys E4200 series is its ease of setup and management. The installation process is streamlined with a user-friendly web-based interface and Linksys Smart Setup, allowing users to get their network up and running in minutes. Furthermore, users can easily manage their network through the Linksys Smart Wi-Fi app, which provides control over connected devices, parental controls, and guest access settings.

Security features also play a crucial role in Linksys E4200 routers, offering WPA2 encryption, a built-in firewall, and the ability to manage guest networks, thus ensuring that users maintain secure connections while sharing their internet with visitors.

In summary, the Linksys E4200 series routers stand out for their dual-band performance, high-speed capabilities, extended range, and robust security features. Whether for streaming, gaming, or everyday browsing, these routers provide a reliable solution for modern networking demands.
Top Page Image Contents