Linksys E4200 manual How to set up the Dhcp server on your router, Auto 20 MHz or 40 Mhz MHz Only

Page 34

Linksys E-Series

b.Network Name (SSID) – Provide a unique SSID for your 5 GHz wireless network. The name must not exceed 32 keyboard characters. In the example above, the 5 GHz wireless network was renamed BronzeEagle5GHz.

c.Channel Width – We recommend that you keep the default (Auto) settings. In Auto mode, the router and the network clients automatically switch to the 40 MHz mode if:

••Your wireless clients support the 40 MHz mode (sometimes called Bonded mode) in which two 20 MHz channels are bonded together for better performance.

••There is no adjacent interference.

With more available channels and less chance of interference on the 5 GHz band, you have the option to force the 40MHz mode.

On the 5GHz band, you can select:

••Auto (20 MHz or 40 Mhz)

••20 MHz Only

••40 MHz Only

On the 2.4 GHz band, you can select:

••Auto (20 MHz or 40Mhz)

••20 MHz Only

d.Channel – Choose the operating channel for each band. Your router will automatically select the channel with the least amount of interference if you leave the default Auto or Auto (DFS) setting. We recommend keeping the default settings for both bands.

e.SSID Broadcast – When wireless clients look for wireless networks to connect to, they detect the SSID (wireless network name) broadcast by the router. To broadcast your router’s SSID, keep the default setting (Enabled). If you do not want to broadcast the router’s SSID, select Disabled. We recommend keeping the default setting (Enabled) for both bands.

4.To apply your changes, click Save Settings at the bottom of the screen.

Setting Up: Advanced

How to set up the DHCP server on your router

Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to automatically assign an IP address to each computer or device on your network. The DHCP server is enabled by default. If you already have a DHCP server on your network, or if you do not want to use your router as a DHCP server, you should disable this setting.

To configure your router’s DHCP server settings:

Setup > Basic Setup > DHCP Server Settings

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 21).

2.Click the Setup tab, then click the Basic Setup page.

3.Review the DHCP Server Setting fields (in the middle of the screen). You can:

••Enable or disable the DHCP server.

••Change the starting address for the DHCP server.

••Change the number of users (253 maximum).

4.If you change any of the settings, click Save Settings at the bottom of the page.

TIP

For field descriptions, click Help on the right side of the screen.

24

Page 33 Page 35
Image 34
Page 33 Page 35
Contents User Guide Linksys E-Series E1200/E1500 Contents Browser-based Utility Menu Structure E2500 Contents E250062 E3200 Contents Browser-based Utility Menu Structure E4200 Contents Viii Product overview Package contentsFeatures E1200/E1500Back view Bottom viewPower of dual band E2500Ethernet ports Wi-Fi Protected Setup button E3200 Benefits of gigabitPort activity indicators E4200 Built-in USB port and UPnP media serverTop view Product overview Where to find more help Setting Up BasicsHow to create a home network How to set up your routerTo start Cisco Connect for the first time How to start Cisco ConnectClick Set up your Linksys Router. If you do not see this To start Cisco Connect on a Windows computerHow to install Cisco Connect on another computer How to improve your wireless connection speedHow to test your Internet connection speed To install Cisco Connect onto another computerHow to connect a computer to your network How to connect devices to your networkTo create an Easy Setup Key How to connect a computer manually To manually connect a computer to your networkTo connect a wireless printer to your network How to connect a printerHow to connect other devices To manually connect a device to your networkHow to access parental controls How to set up parental controlsTo access parental controls for the first time To access parental controls after the first time To change the parental controls passwordHow to set parental controls How to select the computers to have parental controlsTo select computers that will have parental controls How to set up guest access to your network To set up guest access to your networkHow to change your router’s name and password To change your router’s name and passwordHow to manually set up your router Setting Up AdvancedHow to open the browser-based utility To manually set up your routerTo manually configure your router’s Internet connection How to get the most out of your dual- band routerHow to manually set up your Internet connection Setup Basic SetupWireless Basic Wireless Settings To reconfigure your wireless networkWireless-A Only 802.11a only Wireless-N Only 802.11n only Setup Basic Setup Dhcp Server Settings How to set up the Dhcp server on your routerTo configure your router’s Dhcp server settings Auto 20 MHz or 40 Mhz MHz OnlyTo configure Dhcp reservation How to find your network on the InternetHow to set up Dhcp reservation Click Save SettingsBronzeEagle953.linksysnet.com1024 How to clone a MAC addressSetup MAC Address Clone To clone a MAC address from your computerTo change your VPN passthrough settings How to connect to your corporate office using a VPNHow to optimize your router for gaming and voice Security VPN PassthroughTo configure QOS Applications & Gaming QoSAdministration Management How to remotely change your router settingsConfigure Upstream Bandwidth To access your router remotelyHow to use a router as an access point How to enable Voice over IP on your networkHow to configure UPnP To configure the router for VoIPTo view your new router’s settings To use your old router as an access pointTo add your router to an existing router or gateway How to put your new router behind an existing routerTo add a router to your existing wireless network To share an Internet connectionTo use their DNS To set up a device in the DMZ How to expose a device to the InternetTo extend your network or add wireless capabilities To extend your networkClick Save Settings to apply your changes Improving Security Network security following a manual setupHow do I know if my network is secure? Wi-Fi Protected Setup activity light How to set up wireless security using Wi‑Fi Protected SetupConnecting a device using the Wi-Fi Protected Setup button How to connect a device using its Wi-Fi Protected Setup PIN How to connect a device manuallyHow to control access to your wireless network Wireless Wireless MAC FilterTo change your firewall settings How to improve security using the built-in firewallSecurity-Firewall How to create shared folders Using an External DriveHow to configure storage To create a shared folderHow to manage group and user access to shared folders Storage Administration How to create a groupTo disable anonymous disk access To create a groupTo grant group access to a share How to create a new userHow to grant group access to a share To create a new userTo set up your router for remote file access, you need to How to configure your router’s storage for remote accessHow to configure the FTP server To configure the FTP serverHow to share folders and set access rights To configure FTP and control folder accessHow to access files remotely To access files remotelyTo configure your router as a media server How to set up your router as a media serverStorage Media Server How to connect your UPnP device to the media server To connect an UPnP device to your router’s media serverPort Forwarding and Port Triggering How to set up port forwardingHow to set up port forwarding for a single port Applications & Gaming Single Port ForwardingHow to set up port forwarding for a range of ports How to set up port forwarding for multiple portsTo set up single port forwarding for multiple ports Applications & Gaming Port Range Forwarding How to set up port range triggering for online gamingTo set up port range forwarding Applications & Gaming Port Range TriggeringHow to configure your Xbox for online gaming To back up your router configuration How to back up and restore your router configurationHow to restore factory defaults To restore your router configurationAdministration Factory Defaults How to upgrade the router’s firmwareClick Restore Factory Defaults To upgrade the router’s firmware How to check the status of your routerAdministration Firmware Upgrade How to disable the Ethernet port status lights To check your router status using the browser-based utilityAdministration Diagnostics How to test your Internet connectionTo disable the lights using the browser-based utility To diagnose your Internet connectionHow to configure and use logs Administration LogMaintaining and Monitoring Setup Browser-based Utility Menu StructureBrowser-based Utility Menu Structure Storage Access Restrictions Specifications Linksys E1200Specifications Linksys E1500Linksys E2500 Linksys E3200 Linksys E4200 3425-01486

E-4200, E4200V2, E4200 specifications

The Linksys E4200 series, including the E4200, E4200V2, and E-4200 models, is a renowned line of dual-band wireless routers designed to deliver high-performance connectivity for both home and small office environments. These routers are well-regarded for their distinct features, advanced technologies, and user-friendly characteristics that cater to various networking needs.

One of the main features of the Linksys E4200 series is its dual-band capability, operating on both the 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to optimize their wireless connections, enabling devices that require higher bandwidth, such as gaming consoles and streaming devices, to connect via the 5GHz band for reduced interference and improved speeds. Conversely, standard devices can conveniently operate on the 2.4GHz band.

The E4200 series also boasts Linksys' advanced N600 technology, which delivers combined wireless speeds of up to 600 Mbps. This high-speed performance is crucial for households with multiple devices streaming content, participating in video calls, or engaging in online gaming simultaneously. With four Gigabit Ethernet ports, users can connect wired devices with blazing fast speeds, enhancing the overall network performance.

In terms of range, the E4200 series incorporates multiple external antennas and the MIMO (Multiple Input Multiple Output) technology, which enhances signal strength and coverage throughout larger spaces. This ensures that users can enjoy strong connections even in remote areas of their homes or offices.

Another significant characteristic of the Linksys E4200 series is its ease of setup and management. The installation process is streamlined with a user-friendly web-based interface and Linksys Smart Setup, allowing users to get their network up and running in minutes. Furthermore, users can easily manage their network through the Linksys Smart Wi-Fi app, which provides control over connected devices, parental controls, and guest access settings.

Security features also play a crucial role in Linksys E4200 routers, offering WPA2 encryption, a built-in firewall, and the ability to manage guest networks, thus ensuring that users maintain secure connections while sharing their internet with visitors.

In summary, the Linksys E4200 series routers stand out for their dual-band performance, high-speed capabilities, extended range, and robust security features. Whether for streaming, gaming, or everyday browsing, these routers provide a reliable solution for modern networking demands.
Top Page Image Contents