Linksys E4200V2 To view your new router’s settings, To use your old router as an access point

Page 41

Linksys E-Series

You need to take note of your new router’s settings, then apply some of those settings to the old router so it can work as an access point.

To view your new router’s settings:

Wireless > Basic Wireless Settings

Wireless > Wireless Security

Status > Wireless Network

Setup > Basic Setup

1.Make sure that your new router is connected to the Internet.

2.In the browser-based utility, click the Wireless tab, then click the Basic Wireless Settings page and take note of the Network Name (SSID).

3.Click the Wireless tab, then click the Wireless Security page and take note of the Security Mode and the passphrase.

4.Click the Status tab, then click the Wireless Network page and take note of the Channel.

5.Click the Setup tab, then click the Basic Setup page and take note of the DHCP server’s IP Address range (192.168.1.100 to 192.168.1.149 by default)

To use your old router as an access point:

1.With your computer connected to your old router, log into its browser- based administration utility.

NOTE

Save your changes after finishing each step below.

2.Open the setup page for the local network (LAN).

3.In the Router IP address field, enter an unused IP address for the LAN network of your new router.

For example, if your new router has an IP address of 192.168.1.1, you should choose an IP address on the 192.168.1.0 network. You can choose any address within the range of 192.168.1.2 to 192.168.1.254. You should exclude addresses in the range that will be used by the DHCP Server of your new router (192.168.1.100 to 192.168.1.149). A safe choice might be 192.168.1.250. Take note of this address, because this will be the address that you will use to manage your old router in the future.

4.In the Subnet Mask field, enter 255.255.255.0 or, if available, select that subnet mask from a drop-down list.

Setting Up: Advanced

5.Disable the DHCP server on your old router. (Because your old router will be operating as an access point instead of a router, you don’t want it to distribute IP addresses. There should be only one active DHCP server on your network, and that should be your new router.)

6.To reconfigure the wireless network on your old router:

a.Open the wireless network setup page.

b.Change the network name (SSID) to match the name of your new network. Having the same network name and security settings enables you to seamlessly roam between your new router and your old router.

c.Change the security mode to match the security mode on your new router.

d.Change the passphrase (sometimes called the pre-shared key) on your old router to match the passphrase on your new router.

e.Change the wireless channel to a non-conflicting channel. Some manufacturers have an “Auto” function for channel selection that automatically selects a wireless channel that does not interfere with other nearby wireless networks. If your old router supports an Auto function, select that. Otherwise, you may need to manually select the wireless operating channel on your old router. In the 2.4 GHz wireless spectrum, there are only three non-overlapping channels: 1, 6, and 11. Pick a channel that does not overlap the operating channel of your new router. For example, if your new router is operating on channel 11, configure your old router for either channel 1 or channel 6.

7.Connect an Ethernet network cable to one of the LAN/Ethernet ports on your old router and an Ethernet port on your new router.

CAUTION

Do not connect the cable to the Internet port on your old router. If you do, you may not be able to set up the router as an access point on the current network.

31

Image 41
Contents User Guide Linksys E-Series E1200/E1500 Contents Browser-based Utility Menu Structure E2500 Contents E250062 E3200 Contents Browser-based Utility Menu Structure E4200 Contents Viii Features Package contentsProduct overview E1200/E1500Bottom view Back viewE2500 Power of dual bandEthernet ports Wi-Fi Protected Setup button Benefits of gigabit E3200Port activity indicators Built-in USB port and UPnP media server E4200Top view Product overview How to create a home network Setting Up BasicsWhere to find more help How to set up your routerClick Set up your Linksys Router. If you do not see this How to start Cisco ConnectTo start Cisco Connect for the first time To start Cisco Connect on a Windows computerHow to test your Internet connection speed How to improve your wireless connection speedHow to install Cisco Connect on another computer To install Cisco Connect onto another computerTo create an Easy Setup Key How to connect devices to your networkHow to connect a computer to your network To manually connect a computer to your network How to connect a computer manuallyHow to connect other devices How to connect a printerTo connect a wireless printer to your network To manually connect a device to your networkTo access parental controls for the first time How to set up parental controlsHow to access parental controls To change the parental controls password To access parental controls after the first timeTo select computers that will have parental controls How to select the computers to have parental controlsHow to set parental controls To set up guest access to your network How to set up guest access to your networkTo change your router’s name and password How to change your router’s name and passwordHow to open the browser-based utility Setting Up AdvancedHow to manually set up your router To manually set up your routerHow to manually set up your Internet connection How to get the most out of your dual- band routerTo manually configure your router’s Internet connection Setup Basic SetupWireless-A Only 802.11a only Wireless-N Only 802.11n only To reconfigure your wireless networkWireless Basic Wireless Settings To configure your router’s Dhcp server settings How to set up the Dhcp server on your routerSetup Basic Setup Dhcp Server Settings Auto 20 MHz or 40 Mhz MHz OnlyHow to set up Dhcp reservation How to find your network on the InternetTo configure Dhcp reservation Click Save SettingsSetup MAC Address Clone How to clone a MAC addressBronzeEagle953.linksysnet.com1024 To clone a MAC address from your computerHow to optimize your router for gaming and voice How to connect to your corporate office using a VPNTo change your VPN passthrough settings Security VPN PassthroughApplications & Gaming QoS To configure QOSConfigure Upstream Bandwidth How to remotely change your router settingsAdministration Management To access your router remotelyHow to configure UPnP How to enable Voice over IP on your networkHow to use a router as an access point To configure the router for VoIPTo use your old router as an access point To view your new router’s settingsTo add a router to your existing wireless network How to put your new router behind an existing routerTo add your router to an existing router or gateway To share an Internet connectionTo use their DNS To extend your network or add wireless capabilities How to expose a device to the InternetTo set up a device in the DMZ To extend your networkClick Save Settings to apply your changes How do I know if my network is secure? Network security following a manual setupImproving Security Connecting a device using the Wi-Fi Protected Setup button How to set up wireless security using Wi‑Fi Protected SetupWi-Fi Protected Setup activity light How to connect a device manually How to connect a device using its Wi-Fi Protected Setup PINWireless Wireless MAC Filter How to control access to your wireless networkSecurity-Firewall How to improve security using the built-in firewallTo change your firewall settings How to configure storage Using an External DriveHow to create shared folders To create a shared folderHow to manage group and user access to shared folders To disable anonymous disk access How to create a groupStorage Administration To create a groupHow to grant group access to a share How to create a new userTo grant group access to a share To create a new userHow to configure the FTP server How to configure your router’s storage for remote accessTo set up your router for remote file access, you need to To configure the FTP serverTo configure FTP and control folder access How to share folders and set access rightsTo access files remotely How to access files remotelyStorage Media Server How to set up your router as a media serverTo configure your router as a media server To connect an UPnP device to your router’s media server How to connect your UPnP device to the media serverHow to set up port forwarding for a single port How to set up port forwardingPort Forwarding and Port Triggering Applications & Gaming Single Port ForwardingTo set up single port forwarding for multiple ports How to set up port forwarding for multiple portsHow to set up port forwarding for a range of ports To set up port range forwarding How to set up port range triggering for online gamingApplications & Gaming Port Range Forwarding Applications & Gaming Port Range TriggeringHow to configure your Xbox for online gaming How to restore factory defaults How to back up and restore your router configurationTo back up your router configuration To restore your router configurationClick Restore Factory Defaults How to upgrade the router’s firmwareAdministration Factory Defaults Administration Firmware Upgrade How to check the status of your routerTo upgrade the router’s firmware To check your router status using the browser-based utility How to disable the Ethernet port status lightsTo disable the lights using the browser-based utility How to test your Internet connectionAdministration Diagnostics To diagnose your Internet connectionAdministration Log How to configure and use logsMaintaining and Monitoring Browser-based Utility Menu Structure SetupBrowser-based Utility Menu Structure Storage Access Restrictions Linksys E1200 SpecificationsLinksys E1500 SpecificationsLinksys E2500 Linksys E3200 Linksys E4200 3425-01486

E-4200, E4200V2, E4200 specifications

The Linksys E4200 series, including the E4200, E4200V2, and E-4200 models, is a renowned line of dual-band wireless routers designed to deliver high-performance connectivity for both home and small office environments. These routers are well-regarded for their distinct features, advanced technologies, and user-friendly characteristics that cater to various networking needs.

One of the main features of the Linksys E4200 series is its dual-band capability, operating on both the 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to optimize their wireless connections, enabling devices that require higher bandwidth, such as gaming consoles and streaming devices, to connect via the 5GHz band for reduced interference and improved speeds. Conversely, standard devices can conveniently operate on the 2.4GHz band.

The E4200 series also boasts Linksys' advanced N600 technology, which delivers combined wireless speeds of up to 600 Mbps. This high-speed performance is crucial for households with multiple devices streaming content, participating in video calls, or engaging in online gaming simultaneously. With four Gigabit Ethernet ports, users can connect wired devices with blazing fast speeds, enhancing the overall network performance.

In terms of range, the E4200 series incorporates multiple external antennas and the MIMO (Multiple Input Multiple Output) technology, which enhances signal strength and coverage throughout larger spaces. This ensures that users can enjoy strong connections even in remote areas of their homes or offices.

Another significant characteristic of the Linksys E4200 series is its ease of setup and management. The installation process is streamlined with a user-friendly web-based interface and Linksys Smart Setup, allowing users to get their network up and running in minutes. Furthermore, users can easily manage their network through the Linksys Smart Wi-Fi app, which provides control over connected devices, parental controls, and guest access settings.

Security features also play a crucial role in Linksys E4200 routers, offering WPA2 encryption, a built-in firewall, and the ability to manage guest networks, thus ensuring that users maintain secure connections while sharing their internet with visitors.

In summary, the Linksys E4200 series routers stand out for their dual-band performance, high-speed capabilities, extended range, and robust security features. Whether for streaming, gaming, or everyday browsing, these routers provide a reliable solution for modern networking demands.