Linksys E3000 manual Guest Access, Router Settings, Change Parental Controls Password, Personalize

Linksys E3000 Chapter 2: Cisco Connect

NOTE: Repeat steps 1-4 to set up parental controls for different computers..

Change Parental Controls Password

If you clicked Change parental controls password, the Change your parental controls password screen appears..

Change Your Parental Controls Password

•• Old password  Enter the old password..

•• New password  Enter a new password of 4-32 characters..

•• Verify password  Re-enter the new password.. Click Change to save your setting..

Guest Access

The Guest access settings screen appears..

Guest Access Settings

Allow guest access  By default, guest access is enabled.. To disable guest access, select no..

Guest network name  By default, the setup software sets up the name of the guest network..

Password  By default, the setup software sets up the password for the guest network.. To change the password, click Change..

If you clicked Change, the Change guest password screen appears..

Change Guest Password

•• Enter a new guest password  Enter a password of 4-32 characters..

•• Click Change to save your setting..

Total guests allowed  By default, 5 guests are allowed Internet access through the guest network.. Select the appropriate number of guests allowed on your guest network; you can select up to 10 guests..

Click Finish to save your settings..

Router Settings

The Router settings screen appears..

Router Settings

Personalize

Router name  The name of the Router is displayed (this is also the name of your wireless network).. To change the name, click Change and go to Change Router Name or Password, page 11..

Password  The password that protects access to the Router’s settings is displayed (this also protects wireless access to your local network)..To change the password, click Change and go to Change Router Name or Password, page 11..

High Performance Wireless-N Router 10