Linksys E3000 manual Wireless Basic Wireless Settings, Simultaneous Networks, Static Routing

Page 22

Linksys E3000

Static Routing

Astatic route is a pre-determined pathway that network information must travel to reach a specific host or network.. Enter the information described below to set up a new static route..

Route Entries  To set up a static route between the Router and another network, select a number from the drop- down list.. Click Delete This Entry to delete a static route..

Enter Route Name  Enter a name for the Route here, using a maximum of 25 alphanumeric characters..

Destination LAN IP  The Destination LAN IP is the address of the remote network or host to which you want to assign a static route..

Subnet Mask  The Subnet Mask determines which portion of a Destination LAN IP address is the network portion, and which portion is the host portion..

Gateway  This is the IP address of the gateway device that allows for contact between the Router and the remote network or host..

Interface  This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks) or the Internet (WAN)..

Click Show Routing Table to view the static routes you have already set up..

Routing Table

Routing Table

For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface are displayed.. Click Refresh to update the information.. Click Close to exit this screen..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this screen..

There are two ways to configure the Router’s wireless network(s), manual and Wi-Fi Protected Setup..

Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network.. If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup..

Chapter 3: Advanced Configuration

Simultaneous Networks

For more wireless bandwidth, the Router can create two simultaneous yet separate Wireless-N networks, one using the Wireless-N 5 GHz band and one using the Wireless-N 2..4 GHz band.. You can use Wi-Fi Protected Setup to easily configure and connect to both networks (refer to Wi-Fi Protected Setup, page 21), or you can manually configure the Router..

If you use manual configuration, then set up each network with the following:

•• Unique Network Name (SSID)

•• Wireless

security

settings

(refer

to

5 GHz or 2.4 GHz Wireless Security, page 22)

 

Decide which computers and other wireless devices should join which network.. Wireless-N devices support both the 5 GHz and 2..4 GHz bands, so they can join either the 5 GHz or 2..4 GHz network.. Wireless-G and Wireless-B devices support only the 2..4 GHz band, so they should join the 2..4 GHz network.. Wireless-A devices support only the 5 GHz band, so they should join the 5 GHz network..

For the 5 GHz network, configure all computers and other wireless devices with the same 5 GHz Network Name (SSID) and wireless security settings.. For the 2..4 GHz network, configure all computers and other wireless devices with the same 2..4 GHz Network Name (SSID) and wireless security settings..

NOTE: Make sure each network uses a unique Network Name (SSID)..

Wireless > Basic Wireless Settings

Configuration View  To manually configure your wireless networks, select Manual.. Proceed to the Wireless Configuration (Manual) section.. To use Wi-Fi Protected Setup, select Wi-Fi Protected Setup.. Proceed to Wi-Fi Protected Setup, page 21..

High Performance Wireless-N Router

19

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User Guide Contents Appendix E Regulatory Information Appendix C Specifications Appendix D Warranty InformationAppendix F Software End User License Agreement Top Product OverviewBack Horizontal Placement Wall-Mounting PlacementInstallation Cisco ConnectMain Menu Main Menu Router Settings Local Access versus Guest AccessMain Menu Guest Access Main Menu Computers and DevicesComputers and Other Devices Connect with the Easy Setup KeyComputer Create or Update the Easy Setup Key Wireless PrinterConnect Manually First-Time Access of Parental Controls Parental ControlsRestrict Internet Access List Set Up Parental ControlsChange Parental Controls Password Guest AccessRouter Settings PersonalizeOther Options Easy Setup KeyChange Router Name or Password Router DetailsAdvanced Settings How to Exit Cisco ConnectHow to Access Cisco Connect WindowsSetup Basic Setup Advanced ConfigurationHow to Access the Browser-Based Utility Internet SetupStatic IP Automatic Configuration DhcpPPPoE Optional Settings Telstra CableRouter Address Network SetupDhcp Server Settings Dhcp ReservationDdns Service Setup DdnsTime Settings DynDNS..orgMAC Address Clone Setup MAC Address CloneSetup Advanced Routing Advanced RoutingSimultaneous Networks Wireless Basic Wireless SettingsGHz or 2.4 GHz Wireless Security, Static RoutingWireless Configuration Manual GHz Wireless SettingsWi-Fi Protected Setup Security Mode Wireless Wireless SecurityGHz or 2..4 GHz Wireless Security Personal OptionsWPA Personal WEPWireless MAC Filter Wireless Wireless MAC FilterWireless Advanced Wireless Settings GHz and 2..4 GHz Advanced WirelessLinksys E3000 Firewall Security FirewallSecurity VPN Passthrough Web FiltersDisk Management Storage DiskCreate Share Shared Folder Shared Folder AccessShared Folder Edit Format Disk SetupStorage Media Server DatabaseAdd a Media Folder AccessStorage FTP Server Media FolderCreate or Edit an FTP Folder Storage AdministrationInformation CreateCreate or Edit a User Account User ManagementGroup Management Create or Edit a Group AccountInternet Access Policy SummaryApplications and Gaming Port Range Forwarding Applications and Gaming Single Port ForwardingSingle Port Forwarding Port Range Forwarding Applications & Gaming Port Range TriggeringApplications and Gaming DMZ Port Range TriggeringApplications and Gaming QoS QoSMAC Address Online GamesAdd a New Game Voice DeviceRouter Password Administration ManagementSummary Diagnostics Administration LogAdministration Diagnostics LogFactory Defaults Administration Factory DefaultsAdministration Firmware Upgrade Firmware UpgradeStatus Router Status Local NetworkStatus Wireless Network 5GHz/2..4GHz Wireless NetworkSelect Tools Internet Options Appendix a TroubleshootingClick Advanced Settings Select Never dial a connectionGo to Start Control Panel Firewall Click Save SettingsSelect UPnP Framework Access the USB Storage Device Appendix B How to Install and Access USB StorageInstall the USB Storage Device OverviewMap a Drive Windows ExplorerAccess Mapped Drive Windows VistaOn your desktop, double-click the Network icon Windows XP On your desktop, double-click the My Computer icon Map Network Drive Mac OS Click Connect As Display Shared Folder on the DesktopGo to Finder Preferences Check Connected Servers Add to Startup Login Items Select Login ItemsAccess the Browser-Based Utility Advanced Configuration Advanced Users OnlyCreate a Shared Folder Create a User Group Account Create a User AccountAppendix C Specifications EnvironmentalLimited Warranty Appendix D Warranty InformationExclusions and Limitations Obtaining Warranty Service Technical SupportFCC Statement Safety Notices Industry Canada StatementAppendix E Regulatory Information FCC Radiation Exposure StatementAvis d’Industrie Canada Wireless DisclaimerRestrictions dans la bande 5 GHz Linksys E3000 Software Licenses Appendix F Software End User License AgreementCisco Products Schedule Cisco Software License AgreementLinksys E3000 Appendix F Software End User License Agreement Linksys E3000 Appendix F Software End User License Agreement Linksys E3000 Appendix F Software End User License Agreement Schedule 2-A Schedule Open Source and Third Party LicensesPreamble Linksys E3000 Appendix F Software End User License Agreement No Warranty Schedule 2-B GNU Lesser General Public LicenseLinksys E3000 Appendix F Software End User License Agreement Linksys E3000 Appendix F Software End User License Agreement Linksys E3000 Appendix F Software End User License Agreement END of Terms and Conditions END of Schedule 2-B Schedule 2-C Openssl LicenseEND of Schedule 2-C 10012110NC-RR
Top Page Image Contents