Linksys WRT54GC manual Frequently Asked Questions, Is IPSec Pass-Through supported by the Router?

Page 57

Compact Wireless-G Broadband Router

Frequently Asked Questions

What is the maximum number of IP addresses that the Router will support?

The Router will support up to 253 IP addresses.

Is IPSec Pass-Through supported by the Router?

Yes, it is a built-in feature that the Router automatically enables.

Where is the Router installed on the network?

In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications. IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but those protocols cannot connect from the Internet to a LAN.

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet connection speed will vary depending on the speed of your broadband connection. The Router also supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98SE, Windows Millennium,

Windows 2000, or Windows XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems.

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then send a file to a user behind the Router.

Appendix A: Troubleshooting

51

Frequently Asked Questions

Image 57
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Front Panel Router’s Back Panel20 Wireless Tab Wireless Client List Welcome IntroductionWhat’s in this Guide? Compact Wireless-G Broadband Router Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Compact Wireless-G Broadband Router Back PanelBroadband an always-on, fast Internet connection Front Panel PowerBottom Panel Stand Reset ButtonOptional Linksys Longer Range Antenna HGA7S TAB Top PanelOverview Connecting the Compact Wireless-G Broadband RouterConnecting Your Network Devices Connecting Another Router Hardware Installation for Connection to Another RouterConnecting Your Network Devices Configuring the Compact Wireless-G Broadband Router How to Access the Web-based Utility Setup Tab Basic SetupInternet Setup Packet a unit of data sent over a network Static IP Connection TypeOptional Settings Network SetupDhcp Server Settings Time Settings Setup Tab DdnsMAC Address Clone Setup Tab MAC Address Clone12 Setup Tab Advanced Routing Gateway Setup Tab Advanced RoutingWireless Network Wireless Tab Basic Wireless SettingsWireless Security Wireless Tab Wireless Security17 Wireless Tab Wireless Security WPA2 Personal Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsCompact Wireless-G Broadband Router Firewall Security Tab FirewallInternet Access Policy Access Restrictions Tab Internet Access PolicySecurity Tab VPN Passthrough VPN Passthrough25 Access Restrictions Tab Summary To create an Internet Access policyPort Range Forwarding Applications and Gaming Tab Port Range ForwardingCompact Wireless-G Broadband Router Port Range Triggering Applications & Gaming Tab Port Range TriggeringDMZ Applications and Gaming Tab DMZManagement Administration Tab ManagementBackup and Restore Log Administration Tab LogDiagnostics Administration Tab DiagnosticsAdministration Tab Firmware Upgrade Administration Tab Factory DefaultsFactory Defaults Firmware UpgradeStatus Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkDhcp Server 41 Status Tab Wireless Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Compact Wireless-G Broadband Router Open a command prompt. For Windows 98SE and Me Application Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Application Start ~ End Port Protocol IP Address EnabledCompact Wireless-G Broadband Router Need to upgrade the firmware To start over, I need to set the Router to factory defaultFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What are the advanced features of the Router? What is DMZ Hosting?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What is the Ieee 802.11a standard?What is the Ieee 802.11g standard? What Ieee 802.11a features are supported?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is ad-hoc mode? What is infrastructure mode?What is Spread Spectrum? What is ISM band?What is DSSS? What is FHSS? And what are their differences? What is WEP?How do I resolve issues with signal loss? How do I reset the Router?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Compact Wireless-G Broadband Router Appendix C Upgrading Firmware Figure C-1 Administration Tab Firmware UpgradeAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFor the Router’s Web-based Utility Figure E-4 Wireless MAC Filter ListAppendix F Glossary Compact Wireless-G Broadband Router Compact Wireless-G Broadband Router Compact Wireless-G Broadband Router Compact Wireless-G Broadband Router Compact Wireless-G Broadband Router Compact Wireless-G Broadband Router Model Appendix G SpecificationsCertifications Limited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationSafety Notices Appendix J Contact Information
Related manuals
Manual 2 pages 1.87 Kb

WRT54GC specifications

The Linksys WRT54GC is a compact and versatile wireless router that has garnered attention for its impressive performance and functionality. It's part of Linksys' renowned WRT series, known for its reliability and user-friendly features, making it a popular choice for home and small office networking.

One of the main features of the WRT54GC is its support for the 802.11g wireless standard, allowing for wireless speeds of up to 54 Mbps. This makes it suitable for tasks such as web browsing, email, and streaming media, offering users a reliable connection without significant lag. Additionally, the router is backward compatible with 802.11b devices, ensuring that older equipment can still connect seamlessly.

The WRT54GC sports a compact design, making it ideal for users with limited space. Its small footprint does not compromise its performance, as it delivers strong coverage thanks to its two external antennas. This design enables users to extend their wireless signal throughout their homes or offices, reducing dead zones and enhancing connectivity.

Security is a key aspect of the WRT54GC, as it offers WPA2 encryption, providing a robust defense against unauthorized access. The router also supports MAC address filtering, which adds an extra layer of security by allowing only recognized devices to connect to the network. These features ensure that users can enjoy their wireless experience with peace of mind.

Another notable characteristic of the WRT54GC is its ease of setup and management. The device comes with a user-friendly web-based interface that simplifies the configuration process, allowing users to establish their network quickly. With features like DHCP, users can also assign IP addresses automatically, streamlining network management for both novices and advanced users alike.

The integrated four-port Ethernet switch adds to the router's versatility, allowing users to connect wired devices directly. This is particularly beneficial for devices that require a stable connection, such as gaming consoles or desktop computers.

In summary, the Linksys WRT54GC router stands out for its compact design, reliable wireless performance, strong security features, and user-friendly management options. It caters to the needs of both casual internet users and small businesses, making it a timeless choice in the landscape of consumer networking devices.