Instant WirelessTM Series
The Player will now install. When you see the final installation screen, like that shown in Figure 4-4, click the Finish button.
Figure 4-4
Using the Player
To use the Player, simply double-click the Linksys desktop icon (like that shown in Figure 4-5) or select the program from the Program Folder. This will bring up the Wireless Presentation Gateway Player screen, as shown in Figure 4- 6.
Figure 4-5
On the Player’s Welcome screen, you will be given the option of using the Wireless Presentation Gateway in High-Speed Mode. This mode will allow faster transfer of data to your projector or monitor, but will isolate your wire- less PC and not allow access to your network or the Internet while the PC is uti- lizing the Wireless Presentation Gateway. For more information on High-Speed Mode, see Appendix C: Using the Wireless Presentation Gateway in High- Speed Mode.
Click the radio button beside High-Speed Mode if you choose to use this mode. Then, click the Next button to continue.
Wireless Presentation Gateway
Figure 4-6
The following screen, shown in Figure 4-7, will allow you to select which Wireless Presentation Gateway you will be using. If no Wireless Presentation Gateway is found, a screen will appear with instructions on how to manually detect the Wireless Presentation Gateway. Once you’ve selected the Wireless Presentation Gateway from the drop-down menu, click the Next button to con- tinue.
Figure 4-7
