Instant WirelessTM Series
The next screen, shown in Figure
Figure
Click the Take Control of the Presentation Gateway button to start your pres- entation. To pause your presentation or allow access to another user, click the Give Control to Another User button. When you have completed using the Wireless Presentation Gateway, click the Exit button.
Note: An easy way to pause and resume your presentation when using the Wireless Presentation Gateway is to use the hotkey combi- nation of ALT + F12. With the ALT + F12 hotkey combination, you can pause and resume your presentation easily from your keyboard.
Wireless Presentation Gateway
Chapter 5: Troubleshooting
This section provides possible solutions to problems regarding the installation and operation of the Wireless Presentation Gateway. If you can’t find an answer here, check the Linksys website at www.linksys.com.
Can I run an application from a remote computer over the wireless net- work?
This will depend on whether or not the application is designed to be used over a network. Consult the application’s user guide to determine if it supports oper- ation over a network.
Can I use the Presentation Gateway with
Yes, as long as you use it with wireless equipment that complies with the IEEE 802.11b standard.
What is the IEEE 802.11b standard?
It is the IEEE standard for wireless networks. This standard allows wireless LAN hardware from different manufacturers to communicate.
What IEEE 802.11b features are supported?
The product supports the following IEEE 802.11 functions:
•CSMA/CA plus Acknowledge protocol
•
•Automatic Rate Selection
•RTS/CTS feature
•Fragmentation
•Power Management
The Presentation Gateway’s Player cannot detect the Presentation Gateway.
Verify that the Presentation Gateway’s power is on and all of your wireless equipment complies with the 802.11B standard.
Why can’t I access the Internet/Intranet while using the Presentation Gateway?
Make sure you are not using the Presentation Gateway in
10 | 11 |