Martin Audio C8.1T manual C4.8T & C6.8T rail orientation, C-bracketclipped over rail, Step

Page 5
C4.8T & C6.8T rail orientation

Suitable hole cutting methods will depend on the ceiling structure, local conditions, personnel, equipment etc and must be determined by the installer.

Step 2

Place a tile rail either side of the ceiling hole and clip the C-bracket over the upright edges of the tile rails.

Note the rail orientations – outwards for the C4.8T and C6.8T, inwards for the C8.1T.

C4.8T & C6.8T rail orientation

C-bracket clipped over rail

(rails placed outwards)

 

 

 

 

 

 

 

 

C8.1T rail orientation

C-bracket clipped over rail

(rails placed inwards)

 

All material © 2007. Martin Audio Ltd. Subject to change without notice.

Image 5
Contents User’s Guide The Martin ExperienceC4.8T, C.6.8T, C8.1T Description Installation GuideUnpacking ComplianceBaffle switch Voltage & power settingsBaffle switch location ModelPlease note carefully InstallationStep Ceiling loudspeaker with C-bracketC-bracketclipped over rail C4.8T & C6.8T rail orientationrails placed outwards C8.1T rail orientationC-bracketscrewed to tile rail Step Tile rail end StepNote swivel-tabpositions before fully tightening 2-wayceiling loudspeaker orientationLoudspeaker in place Step Input & Loop Through connectorTightening the swivel-tabscrews Step fireproof steel cover fitted Step Safety tag locationCeiling loudspeaker rear can Step WarrantyLocate grille tags into slots