Linksys BEFSR41 v2 manual Dynamic IP Addresses, Dhcp Dynamic Host Configuration Protocol Servers

Page 12

Instant Broadband Series

Dynamic IP Addresses

A dynamic IP address is automatically assigned to a device on the network, e.g., PCs and print servers. These IP addresses are called “dynamic” because they are only temporarily assigned to the PC or device. After a certain time period, they expire.

If a PC logs on to the network (or the Internet) and its dynamic IP address has expired, the DHCP server will assign it a new dynamic IP address.

DHCP (Dynamic Host Configuration Protocol) Servers

PCs and other network devices using dynamic IP addressing are assigned a new IP address by a DHCP server. DHCP frees you from having to assign IP addresses manually every time a new user is added to your network.

DHCP servers can either be a designated PC on the network or another net- work device, such as the Cable/DSL Router.

By factory default, DHCP is enabled on your Router. If you already

have a DHCP server running on your network, you must disable one of the two DHCP servers. If you run more than one DHCP server on your network, you will experience network errors, such as conflicting IP addresses.

To disable DHCP on your Router, see page 44.

Even if you assign a static IP address to a PC, that PC can still use DHCP’s dynamic IP addressing.

If the dynamic IP addressing fails to provide a dynamic IP address for any reason, that PC automatically uses its default static IP address.

ing Your Hardware Toging Up

EtherFast Cable/DSL Routers

Connecting Your Hardware Together and Booting Up

1.Before you begin, make sure that all of your hardware is powered off, including your Router, PCs, hubs, switches, and the cable or DSL modem.

2.A. If you have the 4-Port Cable/DSL Router, connect one end of a net- work cable to one of the LAN ports (labeled 1, 2, 3, or 4) on the back of the Router, and the other end into a standard port on a network device, e.g., a PC, print server, hub, or switch. See page 66 for details on network cabling.

A standard port is any port other than the WAN port

and the Uplink port. It’s a straight-through port.

Repeat the above step to connect more PCs or network devices to the Router.

2.B. If you are connecting the 1-Port Router to just one PC, plug one end of a network cable into the Router’s LAN port and the other end into the PC’s network adapter port. Set the Crossover Switch to crossover mode (X). If the crossover mode does not light up a Link LED, see page 10.

If you are connecting the 1-Port Router to a hub or switch, plug one end of a network cable into the Router’s LAN port, and the other end into to a standard port on your network’s hub or switch. Set the LAN port’s Crossover Switch to its straight-through (II) mode.

If your hub or switch has no more standard ports available, connect the Router using its LAN port to the Uplink port on the hub or switch. Set the Crossover Switch to straight-through mode (II) for this set-up.

2.C. If you have the 3-Port Cable/DSL Router, connect one end of a net- work cable from the one of the Router’s LAN ports (labeled 1, 2, or 3) to a port on a PC, hub, switch, or other network device.

The 3-Port Router features one USB plug-and-play port that connects instantly to any USB-ready desktop or notebook PC. This allows you to connect to and access your Router without even configuring any network cards. Use the enclosed USB cable to connect your PC to the Router: the Type A end connects to your PC’s USB port, while Type B connects to the Router’s USB port.

17

18

Image 12
Contents EtherFast Cable/DSL Routers BEFSR11 EtherFast 1-Port Cable/DSL RouterCopyright & Trademarks Table of Contents Features Package Contents for the 4-Port RouterIntroduction Linksys EtherFast Cable/DSL RouterPackage Contents for the 1-Port Router Package Contents for the 3-Port Router4-Port Router’s Rear Panel Port Router’s Front Panel LEDsGetting to Know the 1-Port EtherFast Cable/DSL Router One-Port Router’s Rear PanelOne-Port Router’s Ports Buttons & Switches BEFSR11 shown above LAN IndicatorsWAN Indicators 1-Port Router’s Front Panel LEDsGetting to Know the 3-Port EtherFast Cable/DSL Router 3-Port Router’s Rear Panel PortsUSB Icon Buttons 3-Port Router’s Front Panel LEDsConnecting the Cable/DSL Router to Your Network OverviewLANs and WANs IP Addressing a Quick LessonDhcp Dynamic Host Configuration Protocol Servers Connecting Your Hardware Together and Booting UpDynamic IP Addresses Ing Your Hardware Toging UpUplinking Connecting More Devices to Your Router Technical CheckpointConfiguring Your Router’s USB Port USB Installation for WindowsInstant Broadband Series USB Installation for Windows Instant Broadband Series USB Installation for Windows Millennium Instant Broadband Series Configuring Your Network with the Cable/DSL Router Configuring the Cable/DSL RouterConfiguring PCs to Connect to the Cable/DSL Router Select the Dhcp tabQuick & Easy Router Administration Cable/DSL Router’s Web-based UtilitySetup Password Status DhcpHelp IP Filtering EtherFast Cable/DSL Routers IP Forwarding Dynamic RoutingStatic Routing DMZ Hosting Logging Troubleshooting Common Problems and SolutionsFrequently Asked Questions Built-in feature that the Router automatically enablesWith a static IP address if you want to use DMZ Hosting How to Ping Your ISP’s E-mail & Web Addresses AppendixStep One To Ping an IP Address Installing the TCP/IP Protocol Step Two Pinging for a Web AddressTCP/IP Installation is now complete Twisted-Pair CablingPort Router Specifications Environmental SpecificationsCrimping Your Own Network Cables Straight-Through Cabling Cross-Over CablingBEFSR11 Customer Support Copyright 2000 Linksys, All Rights Reserved