AlphaGIGABIT Secure Wireless Router 8800
7.5 Wireless:
Use this section to configure your wireless settings .
Your AlphaGIGABIT Router supports three wireless security modes including: WEP,
Basic Wireless Settings:
?Enable Wireless Radio Check to enable this option
?Wireless Network Name also referred, as the SSID will appear in the list when you are browsing for available wireless networks.
?Visibility Status allows you to choose to make your wireless network to be Visible or Invisible. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal.
If you're not using encryption then they could connect to your network. When invisible mode is enabled, you must enter the Wireless Network Name (SSID) manually to connect to the network.
?Auto Channel Select allows the router to automatically choose the best channel.
?Channel from the
?Transmission Rate By default the fastest rate will be automatically selected. You can select the speed from the
Note: If all of your devices can connect in 802.11g Mode then leave the setting at 802.11g only. If you have some devices that are 802.11b/g then you can change the mode to Mixed.
Version 1.0 | Page 31 |