AlphaGIGABIT Secure Wireless Router 8800
8.11 Inbound Filters:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range.
Inbound Filters may be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming or Remote Administration features.
Add Inbound Filter Rule:
?Name: Choose a name for the rule that is meaningful to you.
?Action: Here, the inbound filter rule can be set to either allow or deny applicable messages.
?Source IP Range: Determines the range of Internet addresses the inbound filter rule applies to.
?Source Port Range: Determines the range of ports in which the inbound filter rule applies to.
?Public Port Range: Determines the range of WAN side ports associated with the servers on the LAN that the inbound filter rule applies to.
Inbound Filter Rules List:
This section lists the current Inbound Filter rules. By toggling the Enable checkbox, the MAC Address List can be enabled or disabled. To edit the entries click on the Pencil icon. To delete the entries, click on the trash can icon. If you have made some changes or deletions click on Save Settings button on top of page. If you have made any changes or deletions, click on Save Settings at the top of the page. If your configuration settings are complete, click Reboot the Device or click Continue. The router must reboot before new settings will take effect.
Version 1.0 | Page 48 |