Requirements
•DSL or Cable modem for broadband Internet access.
•Standard Network cables.
•TCP/IP network protocol installed on each PC.
•Wireless Access Point requires Wireless devices compliant with the IEEE 802.11g specifications.
Setup
nPhysical Installation
1.Ensure the Wireless Router and the DSL/Cable modem are powered OFF before commencing. Leave your DSL/Cable modem connected to its wall socket (phone line or cable input).
2.Use standard LAN cables to connect PCs to the Switching Hub ports on the Wireless Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
3.Connect your DSL/Cable Modem to the WAN port on the Wireless Router. Use the cable supplied with your DSL/Cable modem, or a stan- dard network cable.
Page 1