Abocom ARM904 user manual Macintosh Setup

Page 8

Macintosh Setup

1.Open the TCP/IP Control Panel.

2.Select Ethernet from the Connect via pop-up menu.

3.Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank.

4.Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

•Set the Router Address field to the Wireless Router's IP Address.

•Ensure your DNS settings are correct.

Page 7

Image 8

Contents Multi-Function Wire Less Router Requirements SetupPhysical Installation Configuration Testing Plug and PlayManual Configuration Connection Type Data requiredWindows PC Setup WindowsTCP/IP Setup Internet Access For Windows 9x/ME/2000For Windows XP Macintosh Setup Linux Setup using X Windows Select Control Panel NetworkWireless Access Point Setup Setting Wireless Router