Manual Configuration
1.Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the Wireless Router's DHCP Server.
2.Start your WEB browser. In the Address box, enter the following:
HTTP://192.168.1.254
The default user name is 〝admin〞, the default password is left blank.
3.Press the Setup button to configure the router.
4.Step through the Setup Wizard until finished. Refer to the data from your ISP, and the table below, to ensure your choices are correct.
| Connection Type |
|
| Data required. |
|
| Dynamic IP Address |
|
| None |
|
|
|
|
|
|
|
| Specified (Fixed) |
|
| IP Address allocated to you, and |
|
| IP Address |
|
| related information. |
|
|
|
|
|
|
|
| PPPoE |
|
| Login name and password. |
|
|
|
|
|
|
|
| PPTP, Big Pond |
|
| Login name and password, |
|
| (not used in USA) |
|
| Server IP Address |
|
|
|
|
|
|
|
5.On the final screen of the Setup Wizard, run the test and check that an Internet connection can be established.
•If the connection fails, check both your data and the Cable/DSL mo- dem.
•If your ISP has recorded your MAC (physical) address, change the MAC address (on the Setup Wizard's Cable Modem screen) to match the value expected by your ISP.
Page 3