ADC 75 Ohm Interconnect manual Ohm Interconnect Configurations, Modules, Standard Configuration

1 2 / 0 6 • 1 0 3 9 7 8 A E Digital Monitor Module System

Digital Monitor Module System

75 Ohm Interconnect

Configurations

The DMM system is available in several chassis and rack configurations to create a customized interconnect solution. Each module is ordered separately and may be installed in any DMM chassis or rack configuration as the network expands, allowing capital investment to coincide with revenue growth.

Modules

Multiple connector interface types and locations are available to complement existing network designs. Individual modules allow chassis to easily match existing NE circuit counts.

Standard Configuration

Up to 12, 24-position chassis are designed to mount in a standard 600 mm rack for a total of 288 circuits. Cable management bars, trays, and labeling are provided on each chassis.

High-Density Configuration

This uniquely designed dual chassis features two separate compartments, each accommodating up to

eight modules mounted horizontally. The two compact compartments are mounted side-by-side in a specially designed dual-column 600 mm rack. This high-density configuration allows a total of 352 circuits in one rack. Cable management bars and four vertical cabling ducts ensure proper routing for high-density cabling.

Wall-Mount Box

This six-position enclosure serves as an interconnect demarcation point between network providers and customers. Separate locks on each door secure connections from unwanted access.

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 3