Actiontec electronic Wireless-Ready user manual Obtain an IP Address through PPPoE or PPPoA

Chapter 6 Advanced Configuration

After selecting a connection type, click Next to continue configuring the connection.

Obtain an IP Address through PPPoE or PPPoA

Select this option to allow the Gateway to use the Point-to-Point over Ethernet (PPPoE) or Point-to-Point over ATM (PPPoA) protocol.

If a User Name and Password was entered during Basic Setup, it should be dis- played in the “Broadband Connection via PPPoE/PPPoA” screen. If not, enter the information now. If the information is unavailable, contact the ISP.

25