Setting and Using the Alarms, Dimmer Control

MANUALLY SETTING THE CLOCK (Fig. 2 & 3)

1.Make sure the unit is plugged in, but powered off.

2.Press and hold the M button to enter Time Setting mode.

3.Use the Forward and Reverse buttons to set the proper time zone using the list above.

4.Press the M button. The hour will begin flashing. Use the FORWARD and REVERSE buttons to adjust the hour, paying attention to the PM indicator.

5.Press the M button again and the minute will begin flashing. Use the FORWARD and REVERSE buttons again to adjust the minute.

6.Press the M button again to set the day of the week. Use the FORWARD and REVERSE buttons to set the day using 7 for Sunday, 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, and 6 for

Saturday. The Unwind allows you to set a 7 day, 5 day, 2 day alarm (see SETTING THE ALARM section for detailed instructions). For instance, setting a 5 day alarm means it will go off at the same time Monday through Friday, which is why properly setting the day of the week is important.

Once the time zone is set, press the M button again to exit Clock Setting mode. DAYLIGHT SAVINGS TIME (Fig. 2)

The Unwind alarm clock is equipped with a simple DST button to adjust the clock for Daylight Savings. Press the DST button on the top of the unit to adjust the clock to Summer, normal or Winter time.

Setting and Using the Alarms

SETTING ALARM 1 or ALARM 2 (Fig. 2 & 3)

1.Make sure the unit is plugged in, but powered off.

2.Press and hold the desired alarm button (alarm 1 or alarm 2) located on the top of the unit or on the remote control. The hour will begin flashing.

3.Use the FORWARD and REVERSE buttons on top of the unit or on the remote to adjust the hour, paying attention to the PM indicator.

4.Press the alarm button again and the minute will begin flashing. Use the FORWARD and REVERSE buttons again to adjust the minute.

5.Press the alarm button again to select the source. The Flow can be set to Beep, Radio, or iPod/iPhone/ iPad. Use the FORWARD and REVERSE buttons to select which source you want to wake to—Beep, Radio, Apple Device. Please note: If you set the source to Apple Device and your device is not docked, the alarm will default to Beep. If you do not select your source when prompted to do so, the alarm will also default to

Beep.

6.Press the alarm button again and use the FORWARD and REVERSE to select a 7, 5, 2, day alarm setting.

7-day will sound at the same time 7 days a week, 5-day will sound at the same time Monday through Friday, 2-day will sound at the same time Saturday and Sunday.

7.Press the alarm button again to exit Alarm Setting mode.

TURNING OFF THE ALARM / SNOOZE OPERATION (Figures 2 & 3)

The Unwind alarm clock is equipped with gradual wake, which means that the alarm begins soft and slowly gets louder over the course of two minutes. This will ensure a non-jarring wakeup.

•Press the snooze button located on the top of the unit or on the remote control and the alarm will sound again in nine minutes.

Please note: You may only press the Snooze button during the Alarm mode for one hour (7 times). After the seventh time, the alarm will turn off and will not sound again until the next set time.

•To turn off the alarm, press any button on the top of the unit (except Snooze).

Dimmer Control

Press the SNOOZE button to adjust the backlight intensity of clock display. This can be done at power off stage.

Additional Features

Mood Light

1.Press the Mood Light button on top of the unit or on the remote control. The mood light will turn on and will begin changing colors

2.Press the Mood Light button again to freeze the color

3.Press and hold the Mood Light button to turn the mood light off

Sleep Feature

While listening to music or nature sounds, press the SNOOZE button to activate the sleep feature. This allows you to set a sleep timer for 90, 80, 70...10, or 5 minutes. Once set, the unit will continue playing for the set length of time, then will automatically turn off.

USB Charging Port

Please note:

•This USB port is for charging only. It cannot be used to play music through the unit.

•In order to use the USB charging feature, you must have the proper cord to connect to your device with a USB connector on the other end.

To charge your device using the USB charging port (located on the back of the unit):

1.Connect the USB end of the device’s cable into the USB port on the back of the unit

2.Connect the other end of the cord to your device to begin charging

3.If your device is not charging, disconnect both ends of the charging cable, then reconnect to the device and the USB charging port.

One Day Alarm

This alarm clock is equipped with a 1-Day Alarm feature, which allows the alarm to be set for one day only. To activate this feature:

1.Turn the unit over and pull the iPad stabilizing drawer out to expose the battery compartment and the 1-day (Hotel) alarm switch.

2.Move the switch to the ON position. Once this switch is in the ON position, the alarm time will need to be

reset. Please see the Setting and Using the Alarms section for instruction.

Please note:

•When the 1-Day alarm feature is activated, the alarm will only sound once. Once the alarm is turned OFF, it will not sound again until the alarm is reset.

•When setting the alarm for a 1-Day alarm, you will be prompted to set the hour, minute, and alarm source, but will NOT be prompted to set the 7, 5, or 2-day alarm as this feature will be disabled for both alarms.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.