Actiontec electronic HPAP108T manual MAC Filtering

Page 26

Chapter 4 Using the Web Configuration Interface

MAC Filtering

Clicking MAC Filtering on the left side of any Interface screen causes the “MAC Filtering” screen to appear. This feature allows the user to control the wireless net- work by denying or allowing wireless access by specifying the MAC (Media Access Control) address of the wireless client(s) allowed or denied access on the wireless network.

To create a list of MAC addresses allowed access on the network, activate “Allow only stations in list” by clicking on the appropriate radio button. Then, enter the wireless device’s MAC address in the appropriate text boxes, then click Add. Repeat to add more wireless devices. When applied, only the devices whose MAC addresses are listed in the “MAC Filtering Table” will be allowed access to the wireless net- work. No other wireless devices will be allowed access.

To create a list of MAC addresses denied access to the network, activate “Allow any station unless in list” by clicking on the appropriate radio button. Then, enter the wireless device’s MAC address in the appropriate text boxes, then click Add. Repeat to add more wireless devices. When applied, only the devices whose MAC addresses are listed in the “MAC Filtering Table” will be denied access to the wireless network. All other wireless devices will be allowed access.

23

Image 26
Contents Wireless Network Extender Table of Contents Specifications Setting Up Static IP AddressSetting Up File and Printer Sharing Limited WarrantyFeatures Introduction1Getting to Know the Network Extender Wireless light flickers green when the Extender is activeSystem Requirements What is HomePlug? Power LightPhone USA Technical SupportActiontec Electronics, Inc 760 N. Mary Avenue Sunnyvale, CA Plugging in the Extender Installing the Wireless Network ExtenderInstalling the Configuration Utility Page Connecting a Wireless Computer to the Homeline Network This page left intentionally blank Using Configuration Utility Locate DeviceSetup Wizard IP SettingWireless Setting Obtain an IP Address AutomaticallyDisabled WPA-PSK Management Factory DefaultDevice Info Using the Web Configuration Interface Extender Wireless Station ListSystem Summary Administration System PropertiesIP Settings Wireless NetworkChannel Wireless SecurityHide Ssid Broadcast WEP 128/152 bits WEP 64 bitsWEP 104/128 bits Wireless Advanced Settings Data Rate Adjust the Network Extender’s data rate herePage MAC Filtering Backup/Restore Settings Restore Settings from a Backup FileFirmware Upgrade RebootThis page left intentionally blank Troubleshooting TroubleshootingFrequently Asked Questions YesWhich wireless cards will work with the Extender? This page left intentionally blank Setting Up Static IP Address Windows 98 SEPage 192.168.0.2 Windows Me Enter the following numbers in the Subnet mask text boxSetting Up Static IP Address Do not include the periods they are automatically entered Windows Page Setting Up Static IP Address 192.168.0.2 Windows XP Page Setting Up Static IP Address 192.168.0.2 Windows XP Setting Up File Printer SharingFile Sharing Page Setting Up File and Printer Sharing Page Setting Up File and Printer Sharing Page Click OK. a System Settings Change window appears. Click Yes Page Printer Sharing Page General Specifications aWireless Frequency Band GHz ~ 2.5 GHz ModulationEnvironmental LED IndicatorsPower, Wireless Carrier ModulationAccess Point GlossaryPage Appendix B Glossary This page left intentionally blank Class B Equipment Regulatory Compliance NoticesModifications Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty