Actiontec electronic HPAP108T manual Firmware Upgrade, Reboot

Page 28

Chapter 4 Using the Web Configuration Interface

Firmware Upgrade

Clicking Firmware Upgrade on the left side of any Interface screen causes the “Firmware Upgrade” screen to appear. Actiontec periodically posts firmware upgrades to enhance the Extender’s capabilities. Download the upgrade from the Internet to the computer’s hard drive, then locate it by clicking Browse. Once the upgrade file has been located, select it, then click Upgrade. The Network Extender’s firmware will be upgraded to the new version.

Reboot

Clicking Reboot on the left side of any Interface screen causes the “Reboot” screen to appear. Click Reboot in this screen to reboot the Extender.

25

Image 28

Contents Wireless Network Extender Table of Contents Setting Up Static IP Address Setting Up File and Printer SharingSpecifications Limited WarrantyFeatures Introduction1System Requirements Wireless light flickers green when the Extender is activeGetting to Know the Network Extender What is HomePlug? Power LightActiontec Electronics, Inc 760 N. Mary Avenue Sunnyvale, CA Technical SupportPhone USA Installing the Configuration Utility Installing the Wireless Network ExtenderPlugging in the Extender Page Connecting a Wireless Computer to the Homeline Network This page left intentionally blank Using Configuration Utility Locate DeviceSetup Wizard IP SettingWireless Setting Obtain an IP Address AutomaticallyDisabled WPA-PSK Device Info Factory DefaultManagement Using the Web Configuration Interface System Summary Wireless Station ListExtender Administration System PropertiesIP Settings Wireless NetworkHide Ssid Broadcast Wireless SecurityChannel WEP 104/128 bits WEP 64 bitsWEP 128/152 bits Wireless Advanced Settings Data Rate Adjust the Network Extender’s data rate herePage MAC Filtering Backup/Restore Settings Restore Settings from a Backup FileFirmware Upgrade RebootThis page left intentionally blank Troubleshooting TroubleshootingFrequently Asked Questions YesWhich wireless cards will work with the Extender? This page left intentionally blank Setting Up Static IP Address Windows 98 SEPage 192.168.0.2 Windows Me Enter the following numbers in the Subnet mask text boxSetting Up Static IP Address Do not include the periods they are automatically entered Windows Page Setting Up Static IP Address 192.168.0.2 Windows XP Page Setting Up Static IP Address 192.168.0.2 File Sharing Setting Up File Printer SharingWindows XP Page Setting Up File and Printer Sharing Page Setting Up File and Printer Sharing Page Click OK. a System Settings Change window appears. Click Yes Page Printer Sharing Page Specifications a WirelessGeneral Frequency Band GHz ~ 2.5 GHz ModulationLED Indicators Power, WirelessEnvironmental Carrier ModulationAccess Point GlossaryPage Appendix B Glossary This page left intentionally blank Modifications Regulatory Compliance NoticesClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty