Actiontec electronic HPAP108T manual Backup/Restore Settings, Restore Settings from a Backup File

Page 27

Actiontec MegaPlug Wireless Network Extender User Manual

Backup/Restore Settings

Clicking Backup/Restore Settings on the left side of any Interface screen causes the “Backup/Restore Settings” screen to appear.

Backup the Current Settings to a File

This option allows the user to save the settings of the Extender to a file that can be accessed later to reset the Extender to that particular configuration set. To save the currents settings, click Backup, then save the file to the computer’s hard drive.

Restore Settings from a Backup File

To reset the Extender’s settings to a previously saved configuration set, click Browse to locate the configuration file. Once the file is located, select it, then press Restore. The Extender’s configuration will be reset to the configuration file.

Restore Factory Default Settings

To restore the Extender’s factory default settings, click Yes. The default settings will be restored to the Extender.

24

Image 27
Contents Wireless Network Extender Table of Contents Limited Warranty Setting Up Static IP AddressSetting Up File and Printer Sharing SpecificationsIntroduction1 FeaturesWireless light flickers green when the Extender is active System RequirementsGetting to Know the Network Extender Power Light What is HomePlug?Technical Support Actiontec Electronics, Inc 760 N. Mary Avenue Sunnyvale, CAPhone USA Installing the Wireless Network Extender Installing the Configuration UtilityPlugging in the Extender Page Connecting a Wireless Computer to the Homeline Network This page left intentionally blank Locate Device Using Configuration UtilityIP Setting Setup WizardObtain an IP Address Automatically Wireless SettingDisabled WPA-PSK Factory Default Device InfoManagement Using the Web Configuration Interface Wireless Station List System SummaryExtender System Properties AdministrationWireless Network IP SettingsWireless Security Hide Ssid BroadcastChannel WEP 64 bits WEP 104/128 bitsWEP 128/152 bits Data Rate Adjust the Network Extender’s data rate here Wireless Advanced SettingsPage MAC Filtering Restore Settings from a Backup File Backup/Restore SettingsReboot Firmware UpgradeThis page left intentionally blank Troubleshooting TroubleshootingYes Frequently Asked QuestionsWhich wireless cards will work with the Extender? This page left intentionally blank Windows 98 SE Setting Up Static IP AddressPage 192.168.0.2 Enter the following numbers in the Subnet mask text box Windows MeSetting Up Static IP Address Do not include the periods they are automatically entered Windows Page Setting Up Static IP Address 192.168.0.2 Windows XP Page Setting Up Static IP Address 192.168.0.2 Setting Up File Printer Sharing File SharingWindows XP Page Setting Up File and Printer Sharing Page Setting Up File and Printer Sharing Page Click OK. a System Settings Change window appears. Click Yes Page Printer Sharing Page Frequency Band GHz ~ 2.5 GHz Modulation Specifications aWireless GeneralCarrier Modulation LED IndicatorsPower, Wireless EnvironmentalGlossary Access PointPage Appendix B Glossary This page left intentionally blank Regulatory Compliance Notices ModificationsClass B Equipment All other names are the property of their respective owners Miscellaneous Legal NoticesLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty