Actiontec electronic GT701A user manual LAN IP Address, Dhcp Server

Page 43

Actiontec USB/Ethernet DSL Modem User Manual

LAN IP Address

Selecting LAN IP Address in the “Configuring the Advanced Settings” screen gen- erates the “LAN IP Address” screen.

The values in the “Device IP Address” and “Device LAN Netmask” text boxes are the IP address and Subnet mask of the Modem as seen on the network. These values can be modified for your LAN network, but Actiontec recommends keeping the default factory settings (IP address 192.168.0.1 Subnet mask 255.255.255.0).

☞Note: If the Modem’s LAN IP Address is modified, ensure the DHCP Server range is within the same subnet. For more infor- mation, see “DHCP Server Configuration.”

After changing settings, click Next or Back to continue, or Save and Restart to make all changes permanent.

DHCP Server

Selecting DHCP Server in the “Configuring the Advanced Settings” screen gener- ates the “DHCP Server” screen. The Modem has a built-in DHCP (Dynamic Host Configuration Protocol) server that automatically assigns a different IP address to each computer on the network, eliminating IP address conflicts.

The factory default setting is On. To disable the DHCP Server, select Off.

40

Image 43

Contents DSL Modem Table of Contents Setting Up Static IP on the Computer Using UtilitiesSetting Up a Network TroubleshootingIntroduction1 Package ContentsMinimum System Requirements FeaturesIntroduction Getting to Know the Modem Power LightDSL Light Phone Port Internet LightEthernet Light USB LightUSB Port Power PortReset Switch Power SwitchConnecting a Computer to the Modem Setting Up ModemPage Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Installing Phone Filters Setting Up the Modem Page Setting Up the Modem Setting Up the DSL Connection Setting Up the Modem Page Setting Up the Modem Page Basic Setup Performing a Basic SetupPage Changing the Admin User Name and Password Click Save and Restart at the bottom of the screen Accessing Advanced Setup Using Advanced SetupTo access the Web Configurator’s Advanced Setup screens WAN IP Address Transparent Bridging PPP Auto Connect on PPP Auto ConnectEncapsulation PPPoA only Specify a Static IP Address Dhcp Server LAN IP AddressEnding IP Address Beginning IP AddressDNS Dynamic or Static Services BlockingLease Time Domain NameWebsite Blocking Remote Management Application Layer Gateway and Port Forwarding DMZ Hosting High FirewallLow MediumDynamic Routing Static Routing NAT Network Address TranslationTime Zone UPnP Universal Plug and PlayRemote Syslog Capture General Status Viewing Modem’s StatusPage ARP Table Routing TableWAN Status Active User List LAN StatusThis page left intentionally blank Web Activity Log Using UtilitiesSystem Log DSL Settings Upgrade Firmware Restore Default SettingsEthernet Setting Up a NetworkPage Setting Up a Network Page Setting Up a Network USB Setting Up a Network Page Setting Up a Network Page Physical Connections TroubleshootingTroubleshooting Cannot Use the InternetWhich connection speeds does the Modem support? Frequently Asked QuestionsConnection to the Internet Which protocols does the Modem support?Will my Xbox work with the Modem? Is the Modem flash-upgradeable? How do I do it?What is the valid IP range I can use for my home network? How do I find out which IP address my computer is using?Yes, if the application is designed to run over a network Does the Modem function as a firewall? What is the default username for the Modem?What is NAT and how does it protect my network? How many computers can be connected through the Modem?This page left intentionally blank Locating Computer Information ReferenceLocating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows MeAppendix b Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up ModemComputer Security Modem SecurityInternet Browsers Electronic Security 100 Full-rate Adsl Interface Specifications dGeneral WAN PPP, DHCP, Static IPPower, DSL, Internet, Ethernet, USB LED IndicatorsEnvironmental Glossary Access Point104 Ssid 106 Classic Non-Windowsf System Setup108 Appendix f Non-Windows Setup 110 Modifications Regulatory Compliance NoticesClass B Equipment All other names are the property of their respective owners Miscellaneous Legal Notices113 Limited Warranty114 Limited Warranty 116