Actiontec electronic GT701A user manual Frequently Asked Questions, Connection to the Internet

Page 77

Actiontec USB/Ethernet DSL Modem User Manual

Connection to the Internet

To verify the Modem’s connection to the Internet, open a Web browser. In the “Address” text box, type 192.168.0.1 and click Go. The Modem’s Web Configurator Main Menu appears. Select Status, and once the “Status” screen appears, verify that “Connected” is displayed in the “WAN” section of the screen. If not, power cycle the Modem by unplugging and then replugging the Power cord. After power cycling the Modem, check the connection status again. If still disconnected, go to the Main Menu, select Setup, and go through a Basic Setup procedure, making sure to enter all correct selections for your connection. After saving all settings and restarting the Modem, check the connection status again. If still disconnected, unplug the Modem’s Power cord and leave it unplugged for at least 10 minutes. Replug the Power cord, restart the Modem, and check the connection again.

Frequently Asked Questions

This section contains a list of questions concerning the Modem, and answers to the questions.

General

I have run out of Ethernet ports on my Modem. How do I add more computers?

Plugging in an Ethernet hub or switch can expand the number of ports on the Modem. Connect a standard Ethernet cable from the “Uplink” port of the new hub or switch to the Ethernet port on the Modem, then connect additional computers to the Ethernet hub or switch.

Which protocols does the Modem support?

The internal LAN connections support multiple protocols (e.g. TCP/IP, NetBEUI, IPX/SPX, and AppleTalk). The External WAN connection supports only TCP/IP.

Which connection speeds does the Modem support?

The LAN connections on the Modem support 10/100 Mbps. The WAN connec- tion supports 8 Mbps because of the physical restrictions placed on broadband connections.

74

Image 77

Contents DSL Modem Table of Contents Setting Up a Network Using UtilitiesTroubleshooting Setting Up Static IP on the ComputerIntroduction1 Package ContentsMinimum System Requirements FeaturesIntroduction DSL Light Power LightGetting to Know the Modem Ethernet Light Internet LightUSB Light Phone PortReset Switch Power PortPower Switch USB PortConnecting a Computer to the Modem Setting Up ModemPage Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Installing Phone Filters Setting Up the Modem Page Setting Up the Modem Setting Up the DSL Connection Setting Up the Modem Page Setting Up the Modem Page Basic Setup Performing a Basic SetupPage Changing the Admin User Name and Password Click Save and Restart at the bottom of the screen To access the Web Configurator’s Advanced Setup screens Using Advanced SetupAccessing Advanced Setup WAN IP Address Transparent Bridging Encapsulation PPPoA only PPP Auto ConnectPPP Auto Connect on Specify a Static IP Address Dhcp Server LAN IP AddressEnding IP Address Beginning IP AddressLease Time Services BlockingDomain Name DNS Dynamic or StaticWebsite Blocking Remote Management Application Layer Gateway and Port Forwarding DMZ Hosting High FirewallLow MediumDynamic Routing Static Routing NAT Network Address TranslationTime Zone UPnP Universal Plug and PlayRemote Syslog Capture General Status Viewing Modem’s StatusPage ARP Table Routing TableWAN Status Active User List LAN StatusThis page left intentionally blank Web Activity Log Using UtilitiesSystem Log DSL Settings Upgrade Firmware Restore Default SettingsEthernet Setting Up a NetworkPage Setting Up a Network Page Setting Up a Network USB Setting Up a Network Page Setting Up a Network Page Troubleshooting TroubleshootingCannot Use the Internet Physical ConnectionsConnection to the Internet Frequently Asked QuestionsWhich protocols does the Modem support? Which connection speeds does the Modem support?What is the valid IP range I can use for my home network? Is the Modem flash-upgradeable? How do I do it?How do I find out which IP address my computer is using? Will my Xbox work with the Modem?Yes, if the application is designed to run over a network What is NAT and how does it protect my network? What is the default username for the Modem?How many computers can be connected through the Modem? Does the Modem function as a firewall?This page left intentionally blank Locating Computer Information ReferenceLocating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows MeAppendix b Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix b Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up ModemInternet Browsers Modem SecurityComputer Security Electronic Security 100 General Specifications dWAN PPP, DHCP, Static IP Full-rate Adsl InterfaceEnvironmental LED IndicatorsPower, DSL, Internet, Ethernet, USB Glossary Access Point104 Ssid 106 Classic Non-Windowsf System Setup108 Appendix f Non-Windows Setup 110 Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal Notices113 Limited Warranty114 Limited Warranty 116