Advantek Networks AWR-854G user manual System Requirements, Installation Instruction

1.4System Requirements

•One or more PCs (desktop or notebook) with Ethernet interface.

•TCP/IP protocol must be installed on all PCs.

•Have valid Internet Access account and a DSL or cable modem.

•10/100BaseT network cables with RJ-45 connectors.

•In case to use Wireless Access Point, all Wireless devices must be compliant with IEEE 802.11b/g.

•System with MS Internet Explorer ver. 5.0 or later, or Netscape Navigator ver. 4.7 or later.

1.5Installation Instruction

1)Power off Wireless Router and DSL/cable modem.

2)Connect systems to the LAN ports on the Wireless Router with straight LAN cables.

3)Connect the DSL or cable modem to the WAN port on the Wireless Router.

4)Power on DSL or cable modem first, then connect power adapter to the power jack on the Wireless Router and plug the power cable into an outlet.

5)Check LEDs.

a)Once power on Wireless Router, Power LED should be on.

b)LAN LED should be on for each active LAN connection.

c)The WAN LED should be on when the DSL or cable modem is connected.

Warning: Only use the power adapter is provided from this package, use other power adapter may cause hardware damage

7