Airlink APSUSB2 manual Adding Printer, Click on TCP/IP Protocol under Configuration. See Fig

Step 5 Click on TCP/IP Protocol under

Configuration. See Fig. 3.4

Step 6 You can manually assign an IP ad- dress and subnet mask to allow the Print Server to be on the same subnet as your network, or you can choose to obtain an IP address automatically by RARP, BOOTP, or DHCP.

Note: This Installation Guide uses the default IP address as an example.

Step 7 Write down on a piece of paper the IP address for the Print Server you want to use. Be sure to click Save when you are done configuring the settings.

Step 8 Close the web browser.

Step 9 If you have changed your

computer’s IP address in order to accessFig. 3.4 the web configuration utility, you can now

change the settings back to your original settings.

Section 4

Adding Printer

For Windows 2000/XP

Step 1 Go to Start, Settings, Printers. (Printers and Faxes for XP) and select Add Printer.

Step 2 Click Next at the Add Printer Wiz- ard.

Step 3 Select Local Printer, uncheck the

Automatically detect and install my Plug and Play printer check box, and click Next. See Fig. 4.1

Fig. 4.1