Airlink APSUSB2 manual Section, Connecting the Print Server to your network

Page 2

Section 1

Connecting the Print Server to your network

Warning: Do not plug the power cord to the Print Server until you have reached Step 4.

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a hub/switch/router. See Fig 1.1

Step 2 Make sure all the printers are powered OFF, then connect one end of the printer cable to the printer port of the Print Server and attach the other end of the cable to the printer port of the printer. Repeat this process for each printer on your network.

Step 3 Turn ON the printer(s).

Step 4 Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Fig. 1.1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Guide Connecting the Print Server to your network SectionConfiguring Client IP Address For Windows 2000/XPGo to Start, Settings, Control For Windows 95/98/MEAccessing the Web Configuration Utility See FigClick on TCP/IP Protocol under Configuration. See Fig Adding PrinterPage Click Next Click Finish Click OK Click Browse Page Using the Web Configuration Utility ManagementConfiguration Tools Help Product Specifications Technical Support
Top Page Image Contents