Airlink APSUSB2 manual

Step 4 Select Create a new port. At the drop-down menu, select Standard TCP/IP Port and click Next. See Fig. 4.2

Step 5 Click Next at the Add Standard

TCP/IP Printer Port Wizard.

Fig. 4.2

Step 6 Type in the IP address of the Print Server and the port name you have written down on the piece of paper in Section 3 and click Next. See Fig. 4.3

Note: You must add each port separately.

Fig 4.3

Step 7 Select Custom then click on Set- tings. See Fig. 4.4

Fig. 4.4