Using Web Configuration Utility

Section 3

You can use the Access Point’s built-in Web Configuration Utility to configure the encryption settings and operating modes. This section describes how to configure the Access Point’s wireless and security settings. For information on the different operating modes, please refer to Section 4, Selecting Operating Modes.

Step 1 Open your Web Browser (Internet Explorer or Netscape), enter the IP Address of the Access Point (default: 192.168.1.250) in the Address Bar and press Enter.

Note: If you have changed the IP Address of the Access Point, enter its new IP Address instead of the default.

Step 2 Enter admin for both the User name and Password and click OK.