Airlink101 AR325W manual Dhcp Server

Page 21

5.2.2 DHCP Server

This page allows you to configure the DHCP service of the router. DHCP assigns dynamic IP address to all the network devices connected to the router.

DHCP Server: Select either to Enable or Disable the DHCP service (Default is Enable).

IP Pool Starting Address: Enter the start of the IP pool range.

IP Pool Ending Address: Enter the end of the IP pool range.

Domain Name: Enter the domain name of your network (optional).

Click on the More>> button to see the following fields. (The following fields are optional). Primary DNS: Enter the IP address of your network’s Primary DNS server.

Secondary DNS: Enter the IP address of your network’s Secondary DNS server.

Primary WINS: Enter the IP address of your network’s Primary WINS server.

Secondary WINS: Enter the IP address of your network’s Secondary WINS server.

Gateway: Enter the IP address of your network’s Gateway.

Click Save to save any changes or click Undo to cancel any changes.

21

Image 21
Contents 802.11g Wireless Router Model # AR325W User’s Manual Table of Contents Introduction Functions and FeaturesSecurity Functions Packet Filter Supported SPI Mode SupportedDomain Filter Supported URL Blocking SupportedConnect the Router Hardware InstallationVerify Connection to Router Page Page Setup Wizard Configure the RouterDSL Cable ModemFor Cable Modem Users For DSL UsersExample username@sbcglobal.net Page Checking the System Status Verify Connection Status and Wireless SettingsConnecting to the Router Wirelessly Ssid defaultWEP disabled Accessing the Web Configuration Utility Web ConfigurationBasic Setting Primary SetupDynamic IP Address For Cable Modem Road Runner Static IP AddressDSL PPPoE Pptp Virtual Computers Dhcp Server Clients List WirelessPage Page Change Password Virtual Server Forwarding RulesSpecial AP Miscellaneous Packet Filter Security SettingExample of using the Packet Filter Domain Filter URL Blocking MAC Address Control Miscellaneous Items System Time Advanced SettingsSystem Log Dynamic DNS Snmp Routing Schedule Rule Example of using the Schedule Rule with Virtual Server View Log ToolboxFirmware Upgrade Backup Setting Reset to DefaultReboot For Cable Modem Users Only TroubleshootingFor Cable Modem and DSL Users For DSL Users OnlyAppendix Technical Support