Airlink101 AR325W manual System Log

Page 36

5.5.2 System Log

This page allows you to export the system logs to specific destination by means of syslog (UDP) and SMTP (TCP).

IP Address for Syslog: Enter the destination IP Address where the syslog will be sent to. Be sure to check the Enable box.

IP Address of Outgoing Mail Server: Input the SMTP server IP and port. If you do not specify a port number, the default value (25) is used.

Log or Alert Recipient: Enter the e-mail address of the recipient who should receive the logs or alerts. Be sure to check the Enable box.

View Log (button): Displays the system log.

Click Save to save any changes or click Undo to cancel any changes.

36

Image 36

Contents 802.11g Wireless Router Model # AR325W User’s Manual Table of Contents Functions and Features IntroductionSPI Mode Supported Security Functions Packet Filter SupportedDomain Filter Supported URL Blocking SupportedHardware Installation Connect the RouterVerify Connection to Router Page Page Configure the Router Setup WizardCable Modem DSLFor Cable Modem Users For DSL UsersExample username@sbcglobal.net Page Verify Connection Status and Wireless Settings Checking the System StatusConnecting to the Router Wirelessly Ssid defaultWEP disabled Web Configuration Accessing the Web Configuration UtilityBasic Setting Primary SetupDynamic IP Address For Cable Modem Static IP Address Road RunnerDSL PPPoE Pptp Virtual Computers Dhcp Server Wireless Clients ListPage Page Change Password Forwarding Rules Virtual ServerSpecial AP Miscellaneous Security Setting Packet FilterExample of using the Packet Filter Domain Filter URL Blocking MAC Address Control Miscellaneous Items Advanced Settings System TimeSystem Log Dynamic DNS Snmp Routing Schedule Rule Example of using the Schedule Rule with Virtual Server Toolbox View LogFirmware Upgrade Backup Setting Reset to DefaultReboot Troubleshooting For Cable Modem Users OnlyFor DSL Users Only For Cable Modem and DSL UsersTechnical Support Appendix