Airlink101 AR325W manual

Page 7

Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configure the Router. If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try ipconfig/renew again.

Step 6 For Windows 95/98/ME go to Start, Run, type winipcfg and click OK.

Step 7 Select your network card from the drop-down menu and click Release.

7

Image 7

Contents 802.11g Wireless Router Model # AR325W User’s Manual Table of Contents Introduction Functions and FeaturesURL Blocking Supported SPI Mode SupportedSecurity Functions Packet Filter Supported Domain Filter SupportedConnect the Router Hardware InstallationVerify Connection to Router Page Page Setup Wizard Configure the RouterDSL Cable ModemFor DSL Users For Cable Modem UsersExample username@sbcglobal.net Page Checking the System Status Verify Connection Status and Wireless SettingsSsid default Connecting to the Router WirelesslyWEP disabled Accessing the Web Configuration Utility Web ConfigurationPrimary Setup Basic SettingDynamic IP Address For Cable Modem Road Runner Static IP AddressDSL PPPoE Pptp Virtual Computers Dhcp Server Clients List WirelessPage Page Change Password Virtual Server Forwarding RulesSpecial AP Miscellaneous Packet Filter Security SettingExample of using the Packet Filter Domain Filter URL Blocking MAC Address Control Miscellaneous Items System Time Advanced SettingsSystem Log Dynamic DNS Snmp Routing Schedule Rule Example of using the Schedule Rule with Virtual Server View Log ToolboxFirmware Upgrade Reset to Default Backup SettingReboot For Cable Modem Users Only TroubleshootingFor Cable Modem and DSL Users For DSL Users OnlyAppendix Technical Support