Verification kits

Verification kits are used to verify the performance specifications of an Agilent 8510 system. All kits include a precision Zo airline, mismatched airline, and fixed attenuators. Measured data and uncer- tainties traceable to the U.S. National Institute of Standards and Technology (NIST) are included with each kit. Compliance with MIL-STD 45662A is available for an extra charge (Option 1BP). Option 002 provides verification kit data on magnetic tape for use with the 8510A/B.

Choose a verification kit for each connector type required.

Verification kit	Connector type	Frequency range (GHz)

85051B	7 mm	0.045 to 18

85053B	3.5 mm	0.045 to 26.5

85055A	Type-N	0.045 to 18

85057B	2.4 mm	0.045 to 50

R11645A	WR-28	26.5 to 40

Q11645A	WR-22	33 to 50

U11645A	WR-19	40 to 60

V11645A	WR-15	50 to 75

W11645A	WR-10	75 to 110

Test port cables and adapters

Test port cables and adapter sets are available for various connector types. Special test port adapter sets convert the rugged ports of the network ana- lyzer test set to the desired connector interface.

Each kit contains two adapters, one male and one female. Both the cables and the test port adapters have one special female connector which is designed to connect directly to the 3.5 mm test port (2.4 mm for 8517B). This side of the cable or adapter can only be connected to the test set port and cannot be mated to a standard 3.5 mm (or

2.4mm) male connector. Choose one of the config- urations shown.

Configuration A. This cable arrangement is for appli- cations where the device under test is connected directly to the test set port. This setup offers the best mechanical rigidity for device connection. To adapt the test set port (port 1) to the device under test, choose the appropriate special adapter set. In addition to converting the test port to the desired interface, these adapters also function as “test port savers” which protect the test set from damage and wear due to heavy use.

For Agilent 8514B/8515A/85110A test sets (3.5 mm rugged test port connectors)

		Connector type
		(on device side of
	Cables/adapters	cable/adapter)

For 3.5 mm	85131C semi-rigid cable or	3.5 mm (f)
devices	85131E flexible cable	3.5 mm (f )
	85130D adapter set	3.5 mm (m and f)

For 7 mm	85132C semi-rigid cable or	7 mm
devices	85132E flexible cable	7 mm
	85130B adapter set	7 mm

For Type-N	Use 7 mm cables and the 7-mm-
devices	to-Type-N adapters included
	in the 85054B/D Type-N
	calibration kit

For Agilent 8517B test sets

(2.4 mm rugged test port connectors)

		Connector type
		(on device side
	Cables/adapters	of cable/adapter)

For 2.4 mm	85133C semi-rigid cable or	2.4 mm (f)
devices	85133E flexible cable	2.4 mm (f )
	85130G adapter set	2.4 mm (m and f)

For 3.5 mm	85134C semi-rigid cable or	3.5 mm (f)
devices	85134E flexible cable	3.5 mm (f )
	85130F adapter set	3.5 mm (m and f)

For 7 mm	85135C semi-rigid cable or	7 mm
devices	85135E flexible cable	7 mm
	85130E adapter set	7 mm

CONFIGURATION A

network analyzer

test set

test port

device adapter under

test

single cable

8510C specifications

Agilent Technologies 8510C is a sophisticated network analyzer renowned for its high performance and precision in measuring small signals. Renowned in the electronic test and measurement industry, the 8510C is particularly suited for applications in microwave and RF engineering. This versatile instrument excels in characterizing both passive and active devices, making it indispensable for engineers working on circuit design, antenna measurement, and RF component testing.

One of the main features of the 8510C is its frequency coverage, which spans from 10 MHz to 50 GHz, allowing users to test a wide range of devices and components. This broad frequency range enables the analyzer to address various applications involving microwave frequencies, such as satellite communications and radar systems. Additionally, the device provides exceptional dynamic range, enabling accurate measurements of weak signals alongside more robust signals, a critical feature for today’s complex systems.

The 8510C utilizes state-of-the-art frequency synthesis technology, which enhances its signal stability and allows for precise frequency sweeps. It employs direct signal sampling techniques to improve measurement accuracy and reduce noise, providing engineers with reliable data to support their designs. The instrument boasts a high-resolution display that aids in visualizing S-parameter measurements, enhancing the analysis of transmission and reflection characteristics of devices under test.

Another prominent characteristic of the 8510C is its ability to perform automated measurements, greatly improving productivity in the lab. The device supports multiple measurement formats, including time domain and frequency domain measurements, broadening its application range. Additionally, it can be integrated with other Agilent instruments, offering seamless interconnectivity and advanced measurement capabilities.

The intuitive user interface simplifies operation, allowing engineers to focus on measurement tasks rather than navigating complex controls. The 8510C is compatible with several software packages, including Agilent’s ADS (Advanced Design System), facilitating comprehensive data analysis and modeling.

In summary, the Agilent Technologies 8510C is a cutting-edge network analyzer characterized by its extensive frequency coverage, remarkable dynamic range, accurate measurements, and user-friendly interface. This instrument empowers engineers to achieve high levels of precision and efficiency in their testing processes, making it a cornerstone in the field of RF and microwave engineering.