Allied Telesis CG-WLBARGS Hardware Installation, Wlbargs should be connecting to PC and modem

2Hardware Installation

WLBARGS Manual

2.1 WLBARGS should be connecting to PC and modem

Following the steps below to set up WLBARGS and the connection.

(1)Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router.

(2)Insert the connect into the WAN port of the Router and insert the other side into the WAN port of the modem.

(3)Connect the Power Adapter, and plug in the AC power.

LAN

Modem

WAN

PC corega WLBARGS

2.2 Installation Procedure

To ensure successful installation, following the below steps after confirm- ing all installation data and/or equipment.

Install the hardware -> PC set-up -> Open the browser (such as IE 6.0), and type [192.168.1.1] in the browser’s address bar, and press enter. -> Enter ID: root, and leave Password empty, and press OK. ->Select [Quick Installation Setting] for quick installation->Setting the Wirless Security->Use PC with compatible wireless card for wireless connection.

5