WLBARGO Manual
<Wireless setting/802.11g/b setting>
ESSID | ESSID is a name that makes wireless adapter identify |
| this Router . The default ESSID is [corega]. |
|
|
Mode | • 802.11b/g: auto connect in either 802.11b or 802.11g. |
| • 802.11g: connect in 802.11g mode. |
|
|
Channel | When there is interruption, other channels can be |
| selected. |
|
|
TX Burst | Enable/Disable frame burst function. When it is |
| checked, transmit throughput will be improved. Only |
| work with corega WLCBGMO or WLUSB2GO. |
|
|
Hidden AP | when it's enabled, ESSID will not be seen in the |
| network. |
|
|
WMM | Select [Disable/Enable]to manage function of wireless |
| bandwidth |
|
|
WDS | P to MP(P to MP bridge mode): setup the wireless |
| connection with another AP/Router.※Needs to enter |
| the MAC address of that AP, and each connected AP |
| needs to have the same setted channel. |
| AP Repeater (Repeater Mode): When signal is hard to |
| reach the other AP, users can set this product in AP |
| repeater mode.※Need to enter the MAC address of |
| the other AP, and set the same ESSID. |
|
|
35