2Product Installation
WLBARGO Manual
2.1 Hardware Installation
Following the steps below to set up WLBARGO and the connection.
(1)Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router.
(2)Insert the connect into the WAN port of the Router and insert the other side into the modem.
(3)Connect the Power Adapter, and plug in the AC power.
LAN
WAN
corega WLBARGO | Modem |
PC |
|
2.2 Installation Procedure
To ensure successful installation, following the below steps after confirming all installation data and/or equipment.
Install the hardware
5