Genesis Ribbon Tweeter | Genesis I.C.E 201 manual

a b s o l u t e f i d e l i t y

Another advantage of the line source is that the vertical spectral content of music is virtually the same throughout the length of the line source. Hence, the seating height does not matter with this speaker; unlike point source speakers where it is important for the ears to be aligned in relationship with the tweeter.

The Genesis 201 is also a dipole radiator. The midrange and tweeter drivers are mounted on a rigid acrylic composite panel with no enclosure. This has two advantages: firstly, it eliminates any enclosure or boxy colorations caused by cabinet vibrations or resonance.

Secondly, the dipole creates a cardioid pattern (like a figure-eight), which has its maximum output at the listening position and behind the speaker itself, and minimum output to the sides in the plane of the loudspeakers. This very effectively eliminates the bounce from the sidewalls.

Hence, in conjunction with the line source, the G201 has no first reflection from the floor, ceiling or sidewalls. The net result is that there are far fewer detail-robbing room reflections from the room than other types of loudspeakers. With fewer spurious reflections to confuse your hearing, the program source emerges more clearly. Imaging is deeper, yet more focused.

This results in a loudspeaker system that is virtually room- independent. Also, because there are no phase and frequency distorting reflections created, one can be transported into the audience of the actual concert hall where the music was recorded.

The Genesis Ribbon Tweeter

Reviewers in the Audiophile press have often remarked that the Genesis circular ribbon tweeter is the world’s best. It is a one inch circular planar ribbon design crafted from an extremely thin membrane of Kapton with a photo-etched aluminium “voice coil” that is a mere 0.0005 inch thick. The entire radiating structure has less mass than the air in front of it! That is why it will accurately reproduce frequencies to 36 kHz.

The result of this design is a driver that has a rapid and uniform response to high frequencies, and has the speed of the best ribbon/electrostatic designs without the high distortion and poor dispersion that is typically associated with them.

201 specifications

Genesis I.C.E 201 represents a significant leap forward in the world of industrial automation and control systems. Designed with cutting-edge technologies, it aims to provide robust solutions for manufacturing and industrial processes, ensuring efficiency, reliability, and ease of use.

At the core of Genesis I.C.E 201 is its advanced processor, capable of handling complex calculations and multiple simultaneous operations. This potent processing power allows for real-time monitoring and adjustments, ensuring that operations run smoothly and with minimal downtime. The device is built on a modular architecture, enabling easy customization and scalability to meet the specific needs of different industries.

One of the standout features of the Genesis I.C.E 201 is its user-friendly interface. The intuitive design allows operators to interact effortlessly with the system, minimizing training time and enhancing overall productivity. The screen boasts a high-resolution display that provides clear and concise information at a glance, making it easier for operators to make informed decisions.

Genesis I.C.E 201 is equipped with advanced connectivity options, including Ethernet, Bluetooth, and Wi-Fi capabilities. This connectivity makes it easy to integrate the system into existing networks, enabling seamless communication with other devices and systems within a facility. Such integration enhances data sharing and collaboration, allowing for more streamlined operations and better decision-making processes.

In terms of safety, the Genesis I.C.E 201 incorporates cutting-edge security protocols. It offers various layers of protection against cyber threats, ensuring that sensitive operational data remains secure. Additionally, emergency shut-off mechanisms and fault detection systems are integral to its design, allowing for swift responses to unforeseen issues and preventing accidents in the workplace.

The technology behind Genesis I.C.E 201 also emphasizes energy efficiency. Built with eco-friendly practices in mind, it helps reduce energy consumption while maintaining peak performance levels. This focus on sustainability not only benefits the environment but also lowers operational costs for businesses.

In conclusion, the Genesis I.C.E 201 is a game-changer in industrial automation. Its powerful processor, user-friendly interface, advanced connectivity, robust safety features, and energy-efficient design make it an invaluable asset in any manufacturing setting. As industries continue to evolve and embrace technology, Genesis I.C.E 201 is poised to lead the way into a more innovative and efficient future.