Genesis I.C.E 201 owner manual Speaker Connections

Page 6

a b s o l u t e f i d e l i t y

tweeters up to 10 feet apart. Next, position the woofer towers behind, and just to the outside of the mid/tweeter panels.

Speaker Connections

Use the woofer cables that were found inside the woofer crates to connect the woofer towers to the woofer amplifier. Each end of the cable is clearly marked, AMPLIFIER or SPEAKER. It does not matter which connector is attached to which woofer as long as the channels are correct.

When you connect the woofer tower outputs pay close attention to the way the connector works. This connector is a 50 amp Neutrik Speakon. It only goes in one way, you cannot put it in wrong. However, you can fail to put it in all the way. Push the plug in, and twist it clockwise until the lock "clicks" in place to keep it there. By looking carefully, it will be obvious to how it works.

At the AMPLIFIER end of the servo-bass cable, you will find a male 1/8” mini-jack. The female end is at the end off a flying lead attached to the chassis of the servo-bass amplifier. These jacks are used for grounding an internal shield within the servo-bass cable. For the time

being, leave this grounding disconnected.

Next, connect the mid/tweeter panels to your power amplifier using high quality loudspeaker cables (not supplied) to the 5-way binding posts. We recommend using good quality spade connectors for this job.

To get the music signal to the servo-bass amplifier to power the

woofers, there are two ways to connect it to your system.

The first, and preferred way is to drive it using the output of the power amplifier that is driving the midrange/ tweeter panels using the supplied pair of servo-bass interconnects.

These servo-bass interconnects will be supplied with a pair of banana plugs at one end, and an XLR balanced male plug at the amplifier end. The XLR

Neutrik connector includes a specially designed internal balancing and attenuation circuit that enables the power amplifier to drive the

6

Image 6
Contents S o l u t e f i d e l i t y Message from Genesis S o l u t e f i d e l i t y G201 Set-up Guide UnpackingPlacement of the G201 Loudspeaker System Speaker Connections Control Adjustments S o l u t e f i d e l i t y Servo-bass Amplifier Protection Ground ControlS o l u t e f i d e l i t y Tuning the system Begin with the bass levelImaging and Soundstage Phase Control Further adjustments Make One Change At a Time Defining the SoundstageAppropriate Mid-bass/Low-bass Balance S o l u t e f i d e l i t y Room Treatment Mastering the Refinements of the system Technology Design PhilosophyGenesis Ribbon Tweeter 48inch midrange ribbon Servo-bass AdvantageWoofer Tower Watt Servo Amplifier/Crossover S o l u t e f i d e l i t y Specifications

201 specifications

Genesis I.C.E 201 represents a significant leap forward in the world of industrial automation and control systems. Designed with cutting-edge technologies, it aims to provide robust solutions for manufacturing and industrial processes, ensuring efficiency, reliability, and ease of use.

At the core of Genesis I.C.E 201 is its advanced processor, capable of handling complex calculations and multiple simultaneous operations. This potent processing power allows for real-time monitoring and adjustments, ensuring that operations run smoothly and with minimal downtime. The device is built on a modular architecture, enabling easy customization and scalability to meet the specific needs of different industries.

One of the standout features of the Genesis I.C.E 201 is its user-friendly interface. The intuitive design allows operators to interact effortlessly with the system, minimizing training time and enhancing overall productivity. The screen boasts a high-resolution display that provides clear and concise information at a glance, making it easier for operators to make informed decisions.

Genesis I.C.E 201 is equipped with advanced connectivity options, including Ethernet, Bluetooth, and Wi-Fi capabilities. This connectivity makes it easy to integrate the system into existing networks, enabling seamless communication with other devices and systems within a facility. Such integration enhances data sharing and collaboration, allowing for more streamlined operations and better decision-making processes.

In terms of safety, the Genesis I.C.E 201 incorporates cutting-edge security protocols. It offers various layers of protection against cyber threats, ensuring that sensitive operational data remains secure. Additionally, emergency shut-off mechanisms and fault detection systems are integral to its design, allowing for swift responses to unforeseen issues and preventing accidents in the workplace.

The technology behind Genesis I.C.E 201 also emphasizes energy efficiency. Built with eco-friendly practices in mind, it helps reduce energy consumption while maintaining peak performance levels. This focus on sustainability not only benefits the environment but also lowers operational costs for businesses.

In conclusion, the Genesis I.C.E 201 is a game-changer in industrial automation. Its powerful processor, user-friendly interface, advanced connectivity, robust safety features, and energy-efficient design make it an invaluable asset in any manufacturing setting. As industries continue to evolve and embrace technology, Genesis I.C.E 201 is poised to lead the way into a more innovative and efficient future.