S o l u t e f i d e l i t y | Genesis I.C.E 201 specs

a b s o l u t e f i d e l i t y

The display will flash to identify that the volume function is being adjusted. When you first press one of the volume control buttons, the currently-set volume will flash. The next press will move the volume up or down. Pressing and holding the button will move the volume up or down rapidly.

Next, adjust the phase with the buttons marked “PHS ” or “PHS ” on the remote control. When you first press the phase up or down button, the display will flash “Ph” and then the current phase setting will be shown. The next press of the button will move the phase up or down.

Set the phase to zero to as an initial setting. (If you are not driving the servo-bass amplifier as recommended using the output of the power amplifier, the phase will depend on the phase shift of your power amplifier. A typical value will be 45 to 60 degrees.)

The high-pass (HI) filter determines how low the woofers will play. Set this initially to 20Hz. Next, adjust the low pass (LO) filter (how high the woofer goes). Set this to 95 using the button marked "low pass" (on the remote control).

You will notice two controls on the back of the midrange tweeter panel. The left hand knob is a volume control for the rear tweeters.

Turning this control clockwise will increase the level of the rear tweeters. Use this control if you need a bit more treble or to increase the apparent space of the soundstage. Start with this control at the twelve o'clock position.

The control on the right side is a three- position switch used to adjust the midrange. Start at position two. Position one will sound fuller in the lower midrange while position three will sound leaner and have more upper midrange.

The less obvious effect of the midrange control is to make the soundstage sound more forward, and change the perceived height and position of the performance. Relative to position two, you can raise the soundstage by moving to position three (it’s like moving your seat forwards in the concert hall!!)

201 specifications

Genesis I.C.E 201 represents a significant leap forward in the world of industrial automation and control systems. Designed with cutting-edge technologies, it aims to provide robust solutions for manufacturing and industrial processes, ensuring efficiency, reliability, and ease of use.

At the core of Genesis I.C.E 201 is its advanced processor, capable of handling complex calculations and multiple simultaneous operations. This potent processing power allows for real-time monitoring and adjustments, ensuring that operations run smoothly and with minimal downtime. The device is built on a modular architecture, enabling easy customization and scalability to meet the specific needs of different industries.

One of the standout features of the Genesis I.C.E 201 is its user-friendly interface. The intuitive design allows operators to interact effortlessly with the system, minimizing training time and enhancing overall productivity. The screen boasts a high-resolution display that provides clear and concise information at a glance, making it easier for operators to make informed decisions.

Genesis I.C.E 201 is equipped with advanced connectivity options, including Ethernet, Bluetooth, and Wi-Fi capabilities. This connectivity makes it easy to integrate the system into existing networks, enabling seamless communication with other devices and systems within a facility. Such integration enhances data sharing and collaboration, allowing for more streamlined operations and better decision-making processes.

In terms of safety, the Genesis I.C.E 201 incorporates cutting-edge security protocols. It offers various layers of protection against cyber threats, ensuring that sensitive operational data remains secure. Additionally, emergency shut-off mechanisms and fault detection systems are integral to its design, allowing for swift responses to unforeseen issues and preventing accidents in the workplace.

The technology behind Genesis I.C.E 201 also emphasizes energy efficiency. Built with eco-friendly practices in mind, it helps reduce energy consumption while maintaining peak performance levels. This focus on sustainability not only benefits the environment but also lowers operational costs for businesses.

In conclusion, the Genesis I.C.E 201 is a game-changer in industrial automation. Its powerful processor, user-friendly interface, advanced connectivity, robust safety features, and energy-efficient design make it an invaluable asset in any manufacturing setting. As industries continue to evolve and embrace technology, Genesis I.C.E 201 is poised to lead the way into a more innovative and efficient future.