3Com AP3750 quick start Attach the mounting bracket to the T-bar clamp

Page 7

3Attach the mounting bracket to the T-bar clamp.

Universal mounting bracket

T-bar

Port connector opening

(Viewed from above ceiling tiles, looking down.)

Port connector	Universal mounting bracket
opening
	T-bar

840-9502-0005

4If you are using an external antenna, insert the antenna cable into the antenna connector on the access point.

5Insert the Category 5 cable through the port connector opening in the mounting bracket, then plug the cable into the access point.

TM

840-9502-0002

6Attach the access point to the mounting bracket

Lock

T-bar

840-9502-0006

7

Image 7

Contents About This Guide AP3750 Managed Access PointDiameter 16.76 cm 6.6 inches Height 69 cm Inches 3Com AP3750 Managed Access Point FeaturesRJ-45 Cable Ports Observing Safety PrecautionsCabling Unpacking the Access PointPreparing for Installation PowerMounting the Access Point Connecting External AntennasSuspended Ceiling Flush Ceiling Tiles Cable RequirementAttach the mounting bracket to the T-bar clamp Attach the access point to the mounting bracketBar Slide together Bar clamp halves Suspended Ceiling Installation Drop Ceiling Tiles840-9502-0002 Point Bracket Junction Box InstallationAttach the bracket to the junction box Point Template template Bracket bracket Solid Wall or Ceiling InstallationCable Universal mounting bracket 840-9502-0016 Lock Point Bracket bracket Tabletop InstallationConfiguring the Access Point Connecting the Access Point to a SwitchRadio 2 LED Radio 1 LED Health LED Checking the LED IndicatorsUSA-FEDERAL Communications Commission FCC EMC Compliance Regulatory InformationIndustry Canada IC RF Compliance Manufacturers FCC Declaration of ConformityEurope EU Declaration of Conformity Outras disposições da Directiva 1999/5/CE Allowed Frequency Bands Allowed Channel Numbers Countries Brazil RF Compliance