3Com AP3750 quick start Attach the bracket to the junction box

Page 11

2Attach the bracket to the junction box.

Junction box

Port connector opening

840-9502-0017

3If you are using an external antenna, insert the antenna cable into the antenna connector on the access point.

4Plug the Category 5 cable into the access point and attach the access point to the mounting bracket.

Lock

CAUTION: If you plan to use an external antenna for the 802.11b/g or 802.11a radio, install the antenna at least 20 cm from the access point.

11

Image 11

Contents About This Guide AP3750 Managed Access PointDiameter 16.76 cm 6.6 inches Height 69 cm Inches 3Com AP3750 Managed Access Point FeaturesRJ-45 Cable Ports Observing Safety PrecautionsCabling Unpacking the Access PointPreparing for Installation PowerMounting the Access Point Connecting External AntennasSuspended Ceiling Flush Ceiling Tiles Cable RequirementAttach the mounting bracket to the T-bar clamp Attach the access point to the mounting bracketBar Slide together Bar clamp halves Suspended Ceiling Installation Drop Ceiling Tiles840-9502-0002 Point Bracket Junction Box InstallationAttach the bracket to the junction box Point Template template Bracket bracket Solid Wall or Ceiling InstallationCable Universal mounting bracket 840-9502-0016 Lock Point Bracket bracket Tabletop InstallationConfiguring the Access Point Connecting the Access Point to a SwitchRadio 2 LED Radio 1 LED Health LED Checking the LED IndicatorsUSA-FEDERAL Communications Commission FCC EMC Compliance Regulatory InformationIndustry Canada IC RF Compliance Manufacturers FCC Declaration of ConformityEurope EU Declaration of Conformity Outras disposições da Directiva 1999/5/CE Allowed Frequency Bands Allowed Channel Numbers Countries Brazil RF Compliance