3Com AP3750 quick start 840-9502-0002

Page 9

3Remove the mounting bracket from the access point.

840-9502-0011

4Attach the mounting bracket to the T-bar clamp.

Universal mounting bracket

T- bar

T-bar clamps (attached to T-bar)

Port connector opening

Port connector	Universal mounting bracket
opening
	T-bar

840-9502-0012

(Viewed from above ceiling tiles, looking down.)

5If you are using an external antenna, insert the antenna cable into the antenna connector on the access point.

6Insert the Category 5 cable through the port connector opening in the mounting bracket, then plug the cable into the access point.

TM

840-9502-0002

9

Image 9

Contents About This Guide AP3750 Managed Access PointDiameter 16.76 cm 6.6 inches Height 69 cm Inches 3Com AP3750 Managed Access Point FeaturesRJ-45 Cable Ports Observing Safety PrecautionsPreparing for Installation Unpacking the Access PointPower CablingMounting the Access Point Connecting External AntennasSuspended Ceiling Flush Ceiling Tiles Cable RequirementAttach the mounting bracket to the T-bar clamp Attach the access point to the mounting bracketBar Slide together Bar clamp halves Suspended Ceiling Installation Drop Ceiling Tiles840-9502-0002 Point Bracket Junction Box InstallationAttach the bracket to the junction box Point Template template Bracket bracket Solid Wall or Ceiling InstallationCable Universal mounting bracket 840-9502-0016 Lock Point Bracket bracket Tabletop InstallationConfiguring the Access Point Connecting the Access Point to a SwitchRadio 2 LED Radio 1 LED Health LED Checking the LED IndicatorsUSA-FEDERAL Communications Commission FCC EMC Compliance Regulatory InformationIndustry Canada IC RF Compliance Manufacturers FCC Declaration of ConformityEurope EU Declaration of Conformity Outras disposições da Directiva 1999/5/CE Allowed Frequency Bands Allowed Channel Numbers Countries Brazil RF Compliance